Optimal DG Placement for Power Loss Reduction and Improvement Voltage Profile Using Smart Methods

نویسندگان

  • A.A Gharaveisi Assistant of Control Engineering, Department of electrical engineering, Shahid Bahonar University, Kerman, Iran,
  • GH Shahgholian Associate of Electrical Engineering, Department of electrical engineering, Islamic Azad University, Najaf Abad, Iran,
  • O Zeidabadi Nejad Department of Electrical Engineering, Islamic Azad University, Najaf Abad, Iran,
  • S hasani Department of Electrical Engineering, Islamic Azad University, Sirjan Science and Research Branch,
  • S.A Hashemi Zadeh Department of Electrical Engineering, Islamic Azad University, Rafsanjan, Iran,
چکیده مقاله:

Distributed Generations (DGs) are utilized to supply the active and reactive power in the transmission and distribution systems. These types of power sources have many benefits such as power quality enhancement, voltage deviation reduction, power loss reduction, load shedding reduction, reliability improvement, etc. In order to reach the above benefits, the optimal placement and sizing of DG is significant. In this regard, this paper gets use of the Bacteria Foraging Algorithm (BFA) and Binary Genetic Algorithm (BGA) to investigate the DG placement with the purpose of power loss and voltage deviation reduction. The proposed method is applied on the 33-bus and 69-bus IEEE test systems and the optimal place and size of DGs from the power losses and voltage deviation minimization are assessed. Also, the performance of the above two algorithms are compared with each other.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

optimal dg placement for power loss reduction and improvement voltage profile using smart methods

distributed generations (dgs) are utilized to supply the active and reactive power in the transmission and distribution systems. these types of power sources have many benefits such as power quality enhancement, voltage deviation reduction, power loss reduction, load shedding reduction, reliability improvement, etc. in order to reach the above benefits, the optimal placement and sizing of dg is...

متن کامل

Optimal Allocation of DG Units for Power Loss Reduction and Voltage Profile Improvement of Distribution Networks using PSO Algorithm

This paper proposes a Particle Swarm Optimization (PSO) based technique for the optimal allocation of Distributed Generation (DG) units in the power systems. In this paper our aim is to decide optimal number, type, size and location of DG units for voltage profile improvement and power loss reduction in distribution network. Two types of DGs are considered and the distribution load flow is used...

متن کامل

A Novel Optimal Placement of Pv System for Loss Reduction and Voltage Profile Improvement

In this paper an optimal placement of photovoltaic systems (PV) as a source of active and reactive power in radial distribution networks is considered. The objective function of this problem is minimizing system losses and improving voltage profile. Genetic Algorithm (GA) implemented for this purpose. Photovoltaic solar systems can be used as STATCOM for voltage regulation and power factor corr...

متن کامل

Optimal Reconfiguration of Distribution Network for Power Loss Reduction and Reliability Improvement Using Bat Algorithm

In power systems, reconfiguration is one of the simplest and most low-cost methods to reach many goals such as self-healing, reliability improvement, and power loss reduction, without including any additional components. Regarding the expansion of distribution networks, communications become more complicate and the number of parameters increases, which makes the reconfiguration problem infeasib...

متن کامل

Optimal Placement of SVC for Losses Reduction and Voltage Profile Improvement in Electrical Power System Using Improved Gravitational Search Algorithm

The development of the more increasing power electronics allows the use of FACTS devices to manage and improve either the flow of power or the stability of the power system. One type of FACTS device studied is the SVC. In this study, optimization of SVC is used to determine the most appropriate location and rating in order to obtain the optimum power transfer. Optimization methods used in this ...

متن کامل

Multi Objective Optimization Placement of DG Problem for Different Load Levels on Distribution Systems with Purpose Reduction Loss, Cost and Improving Voltage Profile Based on DAPSO Algorithm

Along with economic growth of countries which leads to their increased energy requirements,the problem of power quality and reliability of the networks have been more considered andin recent decades, we witnessed a noticeable growing trend of distributed generation sources(DG) in distribution networks. Occurrence of DG in distribution systems, in addition tochanging the utilization of these sys...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 01  شماره 03

صفحات  141- 147

تاریخ انتشار 2012-09-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023