Optimization of Biodiesel Production from Castor Oil Using a Microwave Via Response Surface Methodology (RSM)
نویسندگان
چکیده مقاله:
The purpose of this research work was to investigate the optimum operating conditions for biodiesel production from castor oil using a microwave. The Box–Behnken design of experiment was carried out using the Design Expert 7. A response surface methodology (RSM) was used to analyze the influence of the process variables (molar ratio of methanol to castor oil, catalyst concentration, reaction time, and microwave power) on the biodiesel yield. Optimizing biodiesel production reaction based on the yield of reaction by means of response surface method showed that 1.44 wt.% of catalyst concentration, 7.12:1 molar ratio of alcohol to oil, microwave power of 500 W and 120 seconds of reaction time produces the best results for maximizing the conversion percent. Finally, Biodiesel samples were analyzed with Gas Chromatography (GC) method for determination of fatty acid methyl ester yield. The yield of reaction obtained was 92.15% with above operating conditions and temperature of output flow was 58 oC.
منابع مشابه
Biodiesel Production from Crude Cottonseed Oil: An Optimization Process Using Response Surface Methodology
Biodiesel, known as fatty acid methyl ester (FAME), was produced from crude cottonseed oil (triglycerides) by transesterification with methanol in the presence of sodium hydroxide. This process was optimized by applying factorial design and response surface methodology (RSM) with SAS and PSIPLOT programs. A second-order mathematical model was obtained to predict the yield as a function of metha...
متن کاملOptimization of Lipase-Catalyzed Transesterification of Cotton Seed Oil for Biodiesel Production Using Response Surface Methodology
The aim of this work was to study the biodiesel production from cotton seed oil by lipase produced by Pichia guilliermondii lipase, which was immobilized onto hydrophobic magnetic particles (HMPs). The optimum reaction conditions were determined for lipase dosage, methanol-to-oil molar ratio, temperature and water content. Using response surface methodology, a quadratic polynomial equation was ...
متن کاملBiodiesel Production from Castor Seeds by Reactive Extraction conventionally and via Ultra-Sound Using Response Surface Methodology
The goal of this study is to reduce the production cost of biodiesel, so we used non edible oil (castor seeds oil) which has a unique structure; suitable for biodiesel production and has lower cost compared to other biodiesel from other vegetable oils. Reactive extraction via ultrasonicassisted process was used offering the potential for shorter reaction times, cheaper reagents and less insigni...
متن کاملOptimization of Baker’s Yeast Production on Date Extract Using Response Surface Methodology (RSM)
This work aims to study the production of the biomass of S. cerevisiae on an optimized medium using date extract as the only carbon source in order to obtain a good yield of the biomass. The biomass production was carried out according to the central composite experimental design (CCD) as a response surface methodology using Minitab 16 software. Indeed, under optimal biomass production conditio...
متن کاملoptimization of ultrasonic reactor geometry for biodiesel production using response surface methodology
biodiesel fuel, which is produced by transesterification reaction between alcohol and vegetable oil/animal fat is proposed as a clean alternative to petro diesel fuel. today, one of the new technologies to produce biodiesel is using ultrasonic energy that makes production faster, with improved quality and less expensive. various factors that affect the design of ultrasonic reactors are ratio of...
متن کاملOptimization and Modeling of Complete Removal of N-Compounds from Oil Cut Using Response Surface Methodology (RSM) by CuAlO2/ZSM-12&35 as a New Photocatalyst
In this study, immobilized CuAlO2 onto the ZSM-12&35 composite was prepared and used as a photocatalyst to remove N-containing oil pollutants (Carbazole) through advanced oxidation. In this method, acetone is used as a reaction solvent that can be partially converted to fuel oxygenates compounds (Octane enhancers) through an aldol condensation reaction. Photocatalyst characterization was perfor...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 3 شماره 4
صفحات 1- 9
تاریخ انتشار 2016-11-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023