Optimization of the FeCo nanowire fabrication embedded in anodic aluminum oxide template by response surface methodology

نویسندگان

  • Maryam Salehi Center of Excellence for High Strength Alloys Technology (CEHSAT), School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), Tehran, Iran
  • Mina Salehi Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran, Iran.
  • Pirooz Marashi Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran, Iran
  • Reza Ghannad Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran, Iran
چکیده مقاله:

Anodic aluminum oxide (AAO) fabricated by two step anodization technique, is used as a template to synthesize FeCo nanowire arrays by AC electrodeposition technique. Response surface methodology (RSM) is applied to design the experiments, fit an empirical model and optimize the conditions to achieve the best magnetic properties. The magnetic properties, pore dimensions, composition and structure of the nanowires are characterized through alternating gradient force magnetometer (AGFM), scanning electron microscopy (SEM), scanning probe microscopy (SPM), energy dispersive spectoroscopy (EDS) and X-ray diffraction (XRD), respectively. The effects of annealing temperature (Ta), Fe concentration (C), the pH of the deposition solution (pH) and electrodeposition temperature (Td) on the magnetic properties are investigated. Maximum experimental coercivity field (Hc = 191.4 KA/m) is obtained in the following conditions: Ta = 550 °C; C = 50 wt%; pH = 6; Td = 40 °C. The optimum values to obtain maximum predicted coercivity field (Hc = 195.5 KA/m) are predicted with a statistical technique as: Ta = 575 °C; C = 50.3 wt%; pH = 6; Td = 39 °C. Moreover, the results show that Td2 and Ta are the most important parameters affecting coercivity field. XRD results show that the crystal structure of nanowires is BCC with (1 1 0) preferred orientation along the nanowire axis.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

optimization of the feco nanowire fabrication embedded in anodic aluminum oxide template by response surface methodology

anodic aluminum oxide (aao) fabricated by two step anodization technique, is used as a template to synthesize feco nanowire arrays by ac electrodeposition technique. response surface methodology (rsm) is applied to design the experiments, fit an empirical model and optimize the conditions to achieve the best magnetic properties. the magnetic properties, pore dimensions, composition and structur...

متن کامل

Fabrication of Polymeric Antireflection Film Manufactured by Anodic Aluminum Oxide Template on Dye-Sensitized Solar Cells

In this study, high energy conversion efficient dye-sensitized solar cells (DSSCs) were successfully fabricated by attaching a double anti-reflection (AR) layer, which is composed of a subwavelength moth-eye structured polymethyl methacrylate (PMMA) film and a polydimethylsiloxane (PDMS) film. An efficiency of up to 6.79% was achieved. The moth-eye structured PMMA film was fabricated by using a...

متن کامل

Photoconductivity of Germanium Nanowire Arrays Incorporated in Anodic Aluminum Oxide

Photoconductivity of germanium nanowire arrays of 50 and 100 nm diameter incorporated into Anodic Aluminum Oxide (AAO) membranes illuminated with visible light is investigated. Photocurrent response to excitation radiation with time constants faster than 10 s were governed by absorption of incident light by nanowires, while photokinetics with time constants of the order of 10 s originates from ...

متن کامل

Anodic Aluminum Oxide Membrane-Assisted Fabrication of β-In2S3Nanowires

In this study, beta-In(2)S(3) nanowires were first synthesized by sulfurizing the pure Indium (In) nanowires in an AAO membrane. As FE-SEM results, beta-In(2)S(3) nanowires are highly ordered, arranged tightly corresponding to the high porosity of the AAO membrane used. The diameter of the beta-In(2)S(3) nanowires is about 60 nm with the length of about 6-8 mum. Moreover, the aspect ratio of be...

متن کامل

Fabrication of Polymeric Antireflection Film Manufactured by Anodic Aluminum Oxide Template on the Dye-Sensitized Solar Cell

In this study, a high energy conversion efficient dye-sensitized solar cells (DSSC) was successfully fabricated by attaching a double anti-reflection (AR) layer which is composed of a subwavelength moth-eye structured polymethyl methacrylate (PMMA) film and a polydimethylsiloxane (PDMS) film. The efficiency is up to 6.79%. The moth-eye structured PMMA film was fabricated by using anodic aluminu...

متن کامل

Optimization of Factors Affecting the Antioxidant Activity of Fenugreek Seed’s Protein Hydrolysate by Response Surface Methodology

Background and Objectives: Bioactive peptides have different health benefits and functional characteristics and are produced by enzymatic hydrolysis, microbial fermentation and chemical synthesis methods. The purpose of this study was to optimize the enzymatic hydrolysis conditions of fenugreek seed protein with alcalase and to evaluate the antioxidant properties of the resulting peptides. Mate...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 47  شماره 1

صفحات  27- 35

تاریخ انتشار 2014-06-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023