Pebax-Modified Cellulose Acetate Membrane for CO2/N2 Separation
نویسندگان
چکیده مقاله:
Carbon dioxide (CO2) release from the exhaust gas streams of power plants that burn fossil fuels contributes the most emission of this gas, which includes more than half of the greenhouse effects. Thus, the separation of CO2 from exhaust gases is one of the main environmental concerns. Membrane technology, due to many advantages, has attracted many research attentions among the various gas separation technologies. In this study, separation performance of cellulose acetate (CA) membrane as the most famous commercial membrane used to separate CO2, improved through the blending method. In this regard, block co-polymer (polyether block amide), as a trade name of Pebax (Pebax® 1657), which has a proper efficiency in separation of CO2 has been used. Cellulose acetate/Pebax blend membranes are prepared by solution casting/solvent evaporation method and their performance in CO2 separation from N2 was studied. The morphologies were also being investigated using SEM, FTIR, DSC and XRD. Gas permeability results, showed that CO2 permeability in CA membrane increases more than 25% and its equivalent CO2/N2 ideal selectivity rises about 59% with the increase in Pebax content up to 8 wt.%.
منابع مشابه
Cellulose Acetate-based Molecularly Imprinted Polymeric Membrane for Separation of Vanillin and O-vanillin
Cellulose acetate-based molecularly imprinted polymeric membranes were prepared using vanillin as template molecule. The microscopic structure of the resultant polymeric membranes was characterized by SEM and FTIR spectroscopy, and the selective binding properties and separation capacity of the membranes for vanillin and o-vanillin were tested with binding experiments and separate experiments, ...
متن کاملApplication of Genetic Programming as a Powerful Tool for Modeling of Cellulose Acetate Membrane Preparation
متن کامل
Cellulose Acetate Nanofiltration Membranes for Cadmium Remediation
In this work, cellulose acetate (CA) nanofiltration (NF) membranes were prepared via non-solvent phase inversion technique (NIPS). Polymer concentration was varied from 22 to 25 wt% in order to study its effect on the membrane properties. The fabricated membranes were characterized in terms of morphological analysis using scanning electron microscopy (SEM), contact angle, water content, water p...
متن کاملIon Transport through Surfactant Modified Cellulose Acetate Phthalate Membrane in Acidic Medium
Cellulose acetate phthalate (CAP)membrane was interacted separately with aqueous HCl solution and aqueous HCl with sodium dodecyl hydrogen sulphate (SDS) as a surfactant and their characteristic properties were determined on the basis of water content, conductance-time and membrane potential data. The possibility of electrochemical modification of cellulose acetate phthalate membrane upon immob...
متن کاملapplication of genetic programming as a powerful tool for modeling of cellulose acetate membrane preparation
abstract— in the present study, genetic programming (gp) as a completely different approach in comparison with conventional methods, based on the imitation of natural evolution of living organism is proposed for the prediction of cellulose acetate (ca) polymeric membrane characteristics. the membrane preparation parameters of polymer concentration, additive concentration and coagulation bath te...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 5 شماره 1
صفحات 25- 32
تاریخ انتشار 2019-01-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023