Performance Evaluation of Nano-silica Modified Bitumen

نویسندگان

  • Ahmad Goli Assistant Professor, Department of Transportation Engineering, University of Isfahan, Isfahan, Iran
  • Hossein Zanjirani Farahani University of Tehran, Tehran, Iran
  • Masoud Palassi Department of Civil Engineering, Tehran University, Tehran, Iran
چکیده مقاله:

In this study, different contents of Nano-silica, 2 wt.%, 4 wt.% and 6 wt.%, have been added to bitumen to modify the physical, mechanical and rheological properties of warm mix asphalt (WMA). WMA is containing 2 wt.% of Sasobit (mixture of long-chain hydrocarbons). Various quality control tests have been carried out to characterize the modified bitumen and WMA. The rheological investigations showed that the complex modulus of base bitumen increases by increasing the percentage of Nano-silica from 2 to 6 wt%. Phase angle and rut factor for the Nano-silica modified bitumen have also decreased significantly. From rheological analysis, 6 wt% Nano-silica has been selected as the optimum content. Results of investigations on the asphalt mixtures demonstrated the fact that by increasing Nano-silica content, the quality of the warm mix asphalt has been improved. By increasing the Nano-silica content, the resilient modulus of WMA has increased; as such, the pavement response under the traffic loading has decreased. By adding Nano-silica to the Sasobit WMA, the depth of cracking has decreased dramatically. So, fatigue life of WMA has been extended in the presence of Nano-silica. Also, the results of wheel tracking test demonstrated that the rutting depth of modified samples have been reduced. The results on WMA showed that 6 wt.% of Nano-silica is the optimum content. This result was in compliance with the rheological investigations.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

performance evaluation of nano-silica modified bitumen

in this study, different contents of nano-silica, 2 wt.%, 4 wt.% and 6 wt.%, have been added to bitumen tomodify the physical, mechanical and rheological properties of warm mix asphalt (wma). wma iscontaining 2 wt.% of sasobit (mixture of long-chain hydrocarbons). various quality control tests have beencarried out to characterize the modified bitumen and wma. the rheological investigations show...

متن کامل

Performance Evaluation of Polymer Modified Bitumen in Flexible Pavement

The growth in various types of industries together with population growth has resulted in enormous increase in production of various types of waste materials world over creating a problem of its disposal in eco-friendly way. To deal with the problem, study on use of plastic waste as partial replacement to bitumen in flexible pavement is considered in the present work. The work consists of an ex...

متن کامل

Rheological properties of modified Bitumen: Comparison of waste polymers’ performance

In this investigation, rheological properties of three different polymer-modified bitumen compounds containing recycled polyethylene terephthalate (R-PET), crumb rubber (CR) and poly (styrene-butadiene-styrene) (SBS) are evaluated and compared. The modified samples were tested by a dynamic shear rheometer (DSR) where complex modulus (G*), phase angle (δ) and rutting resistance (G*/Sinδ) of spec...

متن کامل

Performance Evaluation of SBS/sulfur Modified Bitumen and its Effect on Fuel Resistance

The fuel resistance property plays an important role in asphalts, but available standards for determining this characteristic are presently lacking. In the present work, a number of polymer modified bitumen with styrene-butadiene-styrene (SBS) polymer (4, 5, 6% SBS) and SBS/ sulfur modified bitumen with various percentages of sulfur (1.65, 3, 3.5% based on polymer content) were prepared. Each s...

متن کامل

Experimental Study on the Physical and ‎Rheological Properties of Bitumen ‎Modified with Different Nano Materials ‎‎(Nano SiO2 & Nano TiO2)‎

This study is carried out to explore the effect of nano materials (SiO2 & TiO2) on the physical and rheological properties of Bitumen. To achieve this goal, Nano materials are blended in bitumen in various percentages (0.3, 0.6, 0.9 and 1.2%). The physical and rheological properties of modified binders are characterized using a penetration, softening point, kinematic viscosity and a dynamic...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 3  شماره 1

صفحات  55- 66

تاریخ انتشار 2015-07-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023