Photocatalytic Removal of Amaranth Optimization Using Response Surface Methodology

نویسندگان

  • Ali Noori Department of Chemical Engineering, Ahar Branch, Islamic Azad University
  • Azmi Zakria Department of Physic, University Putra Malaysia, Serdang
چکیده

Since Amaranth (AM) is one of the dye compounds which is harmful to human’s life its removal from industrial waste water would reduce their environmental impact and health effect. Copper nanoparticle (CuNP) is a simple and eco-friendly material which can be used to remove this pollutant. In this paper, copper nanoparticles were synthesized, for removal of AM dye. The experiments were designed by response surface methodology with a modified cubic model to predict the variables. To investigate variables and interaction between them analysis of variance was used with high F-value (1.44), low P-value (<0.0409), non-significant lack of fit, the determination coefficient of 0.898 and the adequate precision of 7.25. Experimental and predicted values of the response illustrated a good correlation. The optimum parameters catalyst amount (0.14 w/w%), initial concentration (7.38 mg/l), reaction time (47.75 s) and pH (2.83) for the highest removal percentage of (96.10%) was attained.

برای دانلود باید عضویت طلایی داشته باشید

برای دسترسی به متن کامل این مقاله و 10 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Application of response surface methodology in the optimization of photocatalytic removal of environmental pollutants using nanocatalysts.

Response surface methodology is a widely used technique for modelling and optimization of the photocatalytic treatment processes of water and wastewater. This methodology not only estimates linear, interaction and quadratic effects of the factors on the response, but also provides a prediction model for the response at the range of the variables studied and the optimum conditions to achieve the...

متن کامل

Response Surface Methodology for Optimizing Adsorption Process Parameters of Amaranth Removal Using Magnetic Layer Double Hydroxide (Fe3O4/ZnFe-LDH)

ABSTRACT Response surface methodology was employed to optimize the adsorption parameters of Amaranth onto magnetic layer double hydroxide (Fe3O4/ZnFe-LDH). Such optimization was undertaken to ensure a high efficiency over the experimental ranges employed, and to evaluate the interactive effects of the initial concentration of Amaranth, pH, adsorbent dosage, temperature and contact time on...

متن کامل

Modeling and Optimization of Arsenic (III) Removal from Aqueous Solutions by GFO Using Response Surface Methodology

Arsenic is a highly toxic element for human beings, which is generally found in groundwater. Dissolved Arsenic in water can be seen as As+3 and As+5 states. The adsorption process is one of the available methods to remove Arsenic from aqueous solutions. Thus, this papers aims at removing Arsenic (III) from aqueous solutions through adsorption on iron oxide granules. The relation among four inde...

متن کامل

Bentazon removal from aqueous solution by reverse osmosis; optimization of effective parameters using response surface methodology

Although bentazon is widely used as an agricultural herbicide, it is harmful to humans and poses many environmental threats. This study focused on the treatment of wastewater contaminated with bentazon pesticides using membrane technology. In this regard, low-pressure reverse osmosis (RO) was employed as it has already been used in the removal of other micro-pollutants. The effects of process v...

متن کامل

Modeling and Optimization of Arsenic (III) Removal from Aqueous Solutions by GFO Using Response Surface Methodology

Arsenic is a highly toxic element for human beings, which is generally found in groundwater. Dissolved Arsenic in water can be seen as As+3 and As+5 states. The adsorption process is one of the available methods to remove Arsenic from aqueous solutions. Thus, this papers aims at removing Arsenic (III) from aqueous solutions through adsorption on iron oxide granules. The relation among four inde...

متن کامل

Optimization of ammonia removal in an integrated fix-film activated sludge using response surface methodology

In this work, removal of ammonia from synthetic wastewater using integrated fixed-film activated sludge (IFAS) process was optimized using response surface methodology (RSM). The main operating parameters such as ammonia concentration rate (ALR) and hydraulic retention time (HRT) were optimized to acquire the maximum removal efficiency. The linear, 2FI, quadratic, mean, and cubic models were ut...

متن کامل

ذخیره در منابع من

ذخیره در منابع من ذخیره شده در منابع من

{@ msg_add @}

  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی راحت تر خواهید کرد

دانلود متن کامل

برای دسترسی به متن کامل این مقاله و 10 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید


عنوان ژورنال:

دوره 13  شماره 2

صفحات  199- 208

تاریخ انتشار 2019-12

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

copyright © 2015-2021