Platinum Extraction Modeling from Used Catalyst by Iodine Solutions
نویسندگان
چکیده مقاله:
Platinum extraction from spent reforming catalysts in iodine solutions under atmospheric pressure at different temperatures, acid concentration, and iodine spices concentration, catalyst particle size, and impeller agitation speed have been studied in our group. In this system, platinum is oxidized from spent catalyst with I3¯ that is formed from the reaction of I2 and I¯ to produce PtI6-2 as its main product. It is obvious that some of the platinum ions in aqueous solution are precipitated as PtI4, especially at high temperatures. Power-law rate equation was used in extraction and precipitation reactions for kinetic modeling. The effect of temperature was studied using the Arrhenius equation. The activation energy for the platinum surface dissolution reaction was calculated as 53 kJ/mol in extraction reaction which indicated that the rate determining step is surface chemical reaction step. The reaction order was 3.01 for platinum concentration in solid and 0.45 for the hydrogen ion concentration, 0.1 for the iodine spices concentration in extraction reaction and 0.54 for platinum ions concentration in precipitation reaction. This model shows good agreement with experimental data.
منابع مشابه
Studies on Platinum Recovery from Solutions after Leaching of Spent Catalysts by Solvent Extraction
The results of studies on the separation of platinum(IV) ions by solvent extraction from aqueous solutions after leaching of spent catalysts have been reviewed. The following processes have been discussed: acid leaching of spent catalysts and solvent extraction of platinum(IV) ions by using organophosphorous acids, amines and oximes as the extractants. In hydrometallurgical leaching of spent au...
متن کاملmodeling loss data by phase-type distribution
بیمه گران همیشه بابت خسارات بیمه نامه های تحت پوشش خود نگران بوده و روش هایی را جستجو می کنند که بتوانند داده های خسارات گذشته را با هدف اتخاذ یک تصمیم بهینه مدل بندی نمایند. در این پژوهش توزیع های فیزتایپ در مدل بندی داده های خسارات معرفی شده که شامل استنباط آماری مربوطه و استفاده از الگوریتم em در برآورد پارامترهای توزیع است. در پایان امکان استفاده از این توزیع در مدل بندی داده های گروه بندی ...
Selective and Efficient Solvent Extraction of Copper(II) Ions from Chloride Solutions by Oxime Extractants
Oxime extractants 3-tert-butyl-2-hydroxy-5-methyl benzaldehyde oxime (HL1) and 3-tert-butyl-2-hydroxy-5-methoxy benzaldehyde oxime (HL2) were synthesized and characterized by conventional spectroscopic methods. Suitable lipophilic nature of the prepared extractants allowed examining the ability of these molecules for extr...
متن کاملExtraction of Silver Ions from Aqueous Solutions by Emulsion Liquid Membrane
A comprehensive study pertaining to the emulsion liquid membrane (ELM) extraction process to enrich dilute aqueous solutions of silver salt is presented. The study has highlighted the importance and influence of membrane composition for maximizing the extraction of Ag+ ions. The liquid membrane was made up of Cyanex-302 as an extractant and the industrial solvent mainly consists of p...
متن کاملModeling of platinum leaching kinetics in aqua-regia solutions using the Elovich equation
Platinum extraction from different secondary sources has been experimentally tested by many researchers. In this article, dissolution of platinum in aqua-regia solution from two types of spent catalysts (reforming and nitric acid production) was kinetically studied. A variety of kinetic models for heterogeneous solid-liquid reactions, including homogeneous diffusion model, shrinking core model,...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 37 شماره 4
صفحات 175- 182
تاریخ انتشار 2018-08-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023