Poly(lactic acid) (PLA) Nanofibers for Bone Tissue Engineering
نویسندگان
چکیده مقاله:
این مقاله چکیده ندارد
منابع مشابه
Polylactic acid (PLA)
This website provides an excellent overview of PLA as a polymer, its properties, and manufacture. This web article describes the production of lactic acid from biomass by microbial fermentation coupled to a poly-merization process to make PLA. The article is a bit dated and its industrial projections are now seen to be a bit over-optimistic. NatureWorks is the company that started large-scale p...
متن کاملCellular behavior after mechanical stimulation on biofunctionalized polylactic acid nanofibers for tendon tissue engineering
Recently, tissue engineered solutions have been investigated to cure rotator cuff tears, whose curing is often long and painful. Scaffolds mimicking the natural structure and composition of natural tendons have been found to be a promising alternative. Tendons are typically composed of aligned collagen nanofibers on which tendon cells called tenocytes lay and produce their extracellular matrix....
متن کاملPolylactic acid (PLA)/Silver-NP/VitaminE bionanocomposite electrospun nanofibers with antibacterial and antioxidant activity
The antibacterial property of silver nanoparticles (Ag-NPs) and the antioxidant activity of Vitamin E have been combined by incorporation of these two active components within polylactic acid (PLA) nanofibers via electrospinning (PLA/Ag-NP/VitaminE nanofibers). The morphological and structural characterizations of PLA/Ag-NP/VitaminE nanofibers were performed by Scanning Electron Microscopy (SEM...
متن کاملLayer-by-layer bioassembly of cellularized polylactic acid porous membranes for bone tissue engineering.
The conventional tissue engineering is based on seeding of macroporous scaffold on its surface ("top-down" approach). The main limitation is poor cell viability in the middle of the scaffold due to poor diffusion of oxygen and nutrients and insufficient vascularization. Layer-by-Layer (LBL) bioassembly is based on "bottom-up" approach, which considers assembly of small cellularized blocks. The ...
متن کاملPolylactic acid-phosphate glass composite foams as scaffolds for bone tissue engineering.
Phosphate glass (PG) of the composition 0.46(CaO)-0.04(Na(2)O)-0.5(P(2)O(5)) was used as filler in poly-L-lactic acid (PLA) foams developed as degradable scaffolds for bone tissue engineering. The effect of PG on PLA was assessed both in bulk and porous composite foams. Composites with various PG content (0, 5, 10, and 20 wt %) were melt-extruded, and either compression-molded or foamed through...
متن کاملBiodegradable Polylactic Acid (PLA) Microstructures for Scaffold Applications
In this research, we present a simple and cost effective soft lithographic process to fabricate PLA scaffolds for tissue engineering. In which, the negative photoresist JSR THB-120N was spun on a glass subtract followed by conventional UV lithographic processes to fabricate the master to cast the PDMS elastomeric mold. A thin poly(vinyl alcohol) (PVA) layer was used as a mode release such that ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 7 شماره 2
صفحات 47- 64
تاریخ انتشار 2019-06-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023