Polypropylene /Polystyrene in situ nano reinforced blends fiber: Morphology and properties

نویسندگان

  • A. Bigdeli Department of Textile Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran.
  • A. Torabinezhad Department of Textile Engineering, Yazd Branch, Islamic Azad University, Yazd, Iran.
  • H. Tayebi Department of Textile Engineering, Qaemshahr Branch, Islamic Azad University, Qaemshahr, Iran.
  • S. Tayebi Department of Chemistry, Yazd Branch, Islamic Azad University, Yazd, Iran.
چکیده مقاله:

Polypropylene / polystyrene blends containing montmorillonite (MMT) were prepared using a twin screw extruder followed by fiber spinning. The melt intercalation of PP and PS alloys was carried out in the presence of a compatibilizer such as maleic anhydride-g-polypropylene (MPP). The crystallization morphology, thermal behaviors and mechanical properties of polypropylene/polystyrene (PP/PS) nanoclay blends nanocomposite fibers were investigated in the present work. The improved adhesion between the phases and fine morphology of the dispersed phase contributed to the significant improvement in the properties and thermal stability of the final nanocomposite materials. On the basis of this result, we describe a general understanding of how the morphology is related to the final properties of OMMT- incorporated PP/PS blends.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

polypropylene /polystyrene in situ nano reinforced blends fiber: morphology and properties

polypropylene / polystyrene blends containing montmorillonite (mmt) were prepared using a twin screw extruder followed by fiber spinning. the melt intercalation of pp and ps alloys was carried out in the presence of a compatibilizer such as maleic anhydride-g-polypropylene (mpp). the crystallization morphology, thermal behaviors and mechanical properties of polypropylene/polystyrene (pp/ps) nan...

متن کامل

Morphology and Properties of Wood. Fiber Reinforced Blends of Recycled Polystyrene and Polyethylene

ABSrRAcr: Material properties of composites prOOuced from ruycled plastics and ruycled ~ fiber were compared. A blend of high -density polyethylene aIKi polystyrene was used as a simulated mixed plastic. Stift'ness was generally improved by the addition of fiber, as expected, but brittleness also increased. Pre-treatment of the ~ fiUer with phenol-fonna1~ resins did not significantly a~t materi...

متن کامل

Glass Fiber Reinforced Polypropylene Mechanical Properties Enhancement by Adhesion Improvement

Glass fibers (GF) are the reinforcement agent most used in polypropylene (PP) based composites, as they have good balance between properties and costs. However, their final properties are mainly determined by the strength and stability of the polymer-fiber interphase. Fibers do not act as an effective reinforcing material when the adhesion is weak. Also, the adhesion between phases can be easil...

متن کامل

Mechanical properties of polypropylene-fiber reinforced concrete after gamma irradiation

Fiber reinforced concretes (FRCs) exhibit property improvement caused by the fibers. By using gamma radiation we have further improved mechanical properties of hydraulic concretes elaborated with Portland cement, water, silica sand, marble and polypropylene (PP) fibers. Compression strength, compression modulus, impact strength and dynamic elastic modulus were determined. Impact fatigue testing...

متن کامل

Polypropylene Fiber Reinforced Concrete - A Review

Polypropylene Fiber Reinforced Concrete is an embryonic construction material which can be described as a concrete having high mechanical strength, Stiffness and durability. By utilization of Polypropylene fibers in concrete not only optimum utilization of materials is achieved but also the cost reduction is achieved. This paper presents a comprehensive review on various aspects Polypropylene F...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 6  شماره 3

صفحات  305- 314

تاریخ انتشار 2015-07-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023