Radiation modeling of a turbulent diffusion flame in diesel engine
نویسندگان
چکیده مقاله:
The purpose of this study is to investigate the effect of radiation heat transfer on temperature distribution and heat flux to the walls of a diesel engine. A diffusion flame is modeled in a simple cylindrical geometry and boundary conditions are defined. A specific solver which can model the turbulent diffusion flame by considering radiation in participating media is used to solve the problem. The solver is verified using experimental data of a furnace. The results show that with considering radiation and non-gray effects in the model, the flame temperature is calculated higher than that with ignoring these effects (about 11% in problem considered in this study).
منابع مشابه
Turbulent Flame Velocity Model for SI Engine
A new model for turbulent flame velocity of premixed flame in spark ignition engine for Iso-octane air mixture has been developed and validated for a wide range of engine operating parameters. The model developed is a zero dimensional thermodynamic model. The effects of engine speed (600-1160 rpm), equivalence ratio (0.7-1.1), unburnt mixture temperature (532650 Rankine), compression ratio (5-8...
متن کاملSoot Modeling in Diesel Engine
This paper presents an advanced version of the original software developed by the author in order to simulate the combustion in the Diesel engines, focusing on simulate soot formation. Complex kinetic mechanisms are need for realistic modeling of shoot formations, but this is applicable only for simple flame computations (e.g. one dimensional, laminar, etc.). For real turbulent flame calculatio...
متن کاملConditional Moment Closure Modeling of Turbulent Spray Combustion in a Direct Injection Diesel Engine
which are in a nonconservative form. Global conservation is not guaranteed if integration is performed for Eqs. (2) and (3), which do not include PDF inside the temporal and spatial derivatives. On the other hand nonconservative forms allow a relatively coarse mesh since conditional averages show much less spatial dependence than PDF weighted Favre averages. Here η ρ ρ η ≡ and the scalar dissip...
متن کاملApplication of a Flame Dictionary Method in Turbulent Premixed Flame Modeling. Construction of a Flame Dictionary
|The construction of a ame dictionary of ame speeds and preheat thicknesses for a given reaction will be discussed. Once the entries of the dictionary have been established, they can be accessed by researchers and programmers to be used in diierent combustion applications. An application of the ame dictionary for turbulent combustion in a circular cylinder is given. Chemical reactions are often...
متن کاملFLAME: A Flow-Level Anomaly Modeling Engine
There are several remaining open questions in the area of flow-based anomaly detection, e.g., how to do meaningful evaluations of anomaly detection mechanisms; how to get conclusive information about the origin and nature of an anomaly; or how to detect low intensity attacks. In order to answer these questions, network traffic traces that are representative for a specific test environment, and ...
متن کاملThree-Dimensional Modeling of Combustion Process, Soot and NOx formation In a Direct-injection Diesel Engine
This paper is presented to study the combustion process and emissions in a direct injection diesel engine. Computations are carried out using a three-dimensional model for flows, sprays, combustion and emissions in Diesel engines. Interactions between combustion and emissions with flow field are considered and it is shown that soot mass fraction increases at regions with low turbulence inten...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 9 شماره None
صفحات 2919- 2933
تاریخ انتشار 2019-03
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023