Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester

نویسندگان

چکیده مقاله:

The most promising method for micro scale energy scavenging is via vibration energy harvesting which converts mechanical energy to electrical energy. Using piezoelectric cantilevers is the most common method for vibration energy harvesting. Changing the shape of the cantilevers can lead to changing the generated output voltage and power. In this work vibration energy harvesting via piezoelectric resonant unimorph cantilevers is studied and new design for obtaining more efficient piezoelectric energy harvester is suggested. This study provides comprehensive analysis of the output voltage relationships and deducing a considerable precise rule of thumb for calculating resonance frequency in cantilever-type unimorph piezoelectric energy harvesters using Rayleigh method. The analytical formula, is then analyzed and verified by FEM simulation in ABAQUS. The analytical data was found to be very close to simulation data. A key finding is that among all the unimorph trapezoidal V-shaped cantilever beams with uniform thickness, the triangular tapered cantilever, can lead to highest resonance frequency and by increasing the ratio of the trapezoidal bases, the resonance frequency decreases. These new findings provide guidelines on system parameters that can be manipulated for more efficient performance in different ambient source conditions.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

shape design optimization of unimorph piezoelectric cantilever energy harvester

the most promising method for micro scale energy scavenging is via vibration energy harvesting which converts mechanical energy to electrical energy by the effect of coupling between electric fields and mechanical variables. using piezoelectric cantilevers is the most common method for vibration energy harvesting. changing the shape of the cantilevers can lead to changing the generated output v...

متن کامل

Cantilever Beam Based Piezoelectric Energy Harvester

AbstractWith the application of wireless sensor networks become widespread, supply energy for these wireless sensors proves to be a significant issue. Moreover, for the ambient vibration lies everywhere, the vibration can supply energy for the wireless sensor via energy harvester. The piezoelectric energy harvester becomes the research focus for the simple structure and higher energy conversion...

متن کامل

study of the resonant frequency of unimorph triangular v-shaped piezoelectric cantilever energy harvester

abstract: the main aim of the vibration energy harvesters is to locally power autonomous devices such as wireless sensors. generally, power levels are low and the environmental benefit of the technology is to replace batteries rather than saving energy per se. piezoelectric vibrational energy harvesters are usually inertial mass based devices, where a cantilever beam with a piezoelectric outer ...

متن کامل

Design optimization and experimental analysis of Piezoelectric Energy harvester

This paper describes an approach to harvest electrical energy from a mechanically excited piezoelectric element. The structure of piezoelectric energy harvester is optimized for maximum power with minimum dimensions through Genetic Algorithm approach to enhance the conversion of mechanical energy into electrical energy using direct piezoelectric effect. Numerical analysis is carried out to obta...

متن کامل

Resonant frequency of bimorph triangular V-shaped piezoelectric cantilever energy harvester

The concept of “energy harvesting” is to design smart systems to capture the ambient energy and to convert it to usable electrical power for supplying small electronics devices and sensors. The goal is to develop autonomous and self-powered devices that do not need any replacement of traditional electrochemical batteries. Now piezoelectric cantilever structures are being used to harvest vibrati...

متن کامل

An Investigation into Resonant Frequency of Triangular V-Shaped Cantilever Piezoelectric Vibration Energy Harvester

Power supply is a bottle-neck problem of wireless micro-sensors, especially where the replacement of batteries is impossible or inconvenient. Now piezoelectric material is being used to harvest vibration energy for self-powered sensors. However, the geometry of a piezoelectric cantilever beam will greatly affect its vibration energy harvesting ability. This paper deduces a remarkably precise an...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 47  شماره 2

صفحات  247- 259

تاریخ انتشار 2016-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023