Single Walled Carbon Nanotube Effects on Mixed Convection heat Transfer in an Enclosure: a LBM Approach

نویسندگان

  • K. Sedighi Mechanical Engineering Department, University of Technology Babol, Babol, I.R. Iran
  • M. Farhadi Mechanical Engineering Department, University of Technology Babol, Babol, I.R. Iran
  • M. Jafari Mechanical Engineering Department, University of Technology Babol, Babol, I.R. Iran
چکیده مقاله:

The effects of Single Walled Carbon Nanotube (SWCNT) on mixed convection in a cavity are investigated numerically. The problem is studied for different Richardson numbers (0.1-10), volume fractions of nanotubes (0-1%), and aspect ratio of the cavity (0.5-2.5) when the Grashof number is equal to 103. The volume fraction of added nanotubes to Water as base fluid are lowers than 1% to make dilute suspensions. The Study presents a numerical treatment based on LBM to model convection heat transfer of Carbon nanotube based nanofluids. A theoretical model is used for effective thermal conductivity of the nanofluid containing Carbon nanotubes. This model covers different phenomena of energy transport in nanofluids. Also, an analytical model is applied for effective viscosity of the nanofluid which includes the Brownian effect and other physical properties of nanofluids. Results show that adding a low value of SWCNT to the base fluid led to significant enhancement of convection heat transfer. Make a comparison between the obtained results and other published papers shows that Carbon nanotubes enhances the rate of convection heat transfer better than other nanoparticles.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

single walled carbon nanotube effects on mixed convection heat transfer in an enclosure: a lbm approach

the effects of single walled carbon nanotube (swcnt) on mixed convection in a cavity are investigated numerically. the problem is studied for different richardson numbers (0.1-10), volume fractions of nanotubes (0-1%), and aspect ratio of the cavity (0.5-2.5) when the grashof number is equal to 103. the volume fraction of added nanotubes to water as base fluid are lowers than 1% to make dilute ...

متن کامل

Numerical simulation of mixed convection heat transfer of nanofluid in an inclined enclosure by applying LBM

Mixed convection of Cu-Water nanofluid is studied numerically in a shallow inclined enclosure by applying lattice Boltzmann method. The D2Q9 lattice and internal energy distribution function based on the BGK collision operator are used in order to develop the thermal flow field. The enclosure's hot lid has the constant velocity of U0 while its cold lower wall has no motion. Moreover, sidewalls ...

متن کامل

Mixed Convection Heat Transfer of Water-Alumina Nanofluid in an Inclined and Baffled C-Shaped Enclosure

In this article, mixed convection heat transfer of alumina-water nanofluid in an inclined and baffled C-shape enclosure is studied. It is assumed that the flow is laminar and steady. There is no energy production, energy storage and viscous heat dissipation. Furthermore, the nanofluid is considered as a continuous, Newtonian and incompressible fluid. Governing equations are discretized by finit...

متن کامل

Melting Heat Transfer Analysis on Magnetohydrodynamics Buoyancy Convection in an Enclosure: A Numerical Study

The roll of melting heat transfer on magnetohydrodynamic natural convection in a square enclosure with heating of bottom wall is examined numerically in this article. The dimensionless governing partial differential equations are transformed into vorticity and stream function formulation and then solved using the finite difference method (FDM). The effects of thermal Rayleigh number (Ra</em...

متن کامل

Natural Convection Heat Transfer within Octagonal Enclosure

The problem of steady, laminar and incompressible natural convection flow in an octagonalenclosure was studied. In this investigation, two horizontal walls were maintained at a constant hightemperature, two vertical walls were kept at a constant low temperature and all inclined walls wereconsidered adiabatic. The enclosure was assumed to be filled with a Bousinessq fluid. The studyincludes comp...

متن کامل

Diffusive-Ballistic Heat Conduction along a Single-Walled Carbon Nanotube

The diffusive-ballistic heat conduction of finite-length single-walled carbon nanotubes has been studied by means of nonequilibrium molecular dynamics simulations. The length dependence of thermal conductivity [1] is quantified for a range of nanotube lengths up to 1.6 μm at room temperature. A gradual transition from nearly pure ballistic to diffusive-ballistic heat conduction was identified f...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 2  شماره 1

صفحات  14- 28

تاریخ انتشار 2014-01-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023