Synergistic effects of Iranian seaweed compounds for anticandidal properties and optimization by Response Surface Methodology

نویسنده

  • A. Taheri Fisheries Department, Faculty of marine sciences, Chabahar Maritime University, Chabahar, Iran, P.O.BOX. 99717- 56499.
چکیده مقاله:

An optimization procedure was applied to investigate the anticandidal property of four different Iranian seaweed extract compositions. Response Surface Methodology (RSM) with the four levels- three–factor Box–Behnken design, including Gracilaria arquata concentration (X1), Nizimudidnia zanardini concentration (X2), Cystoceria indica concentration (X3) and Padina australis concentration (X4), was used to screen for anticandidal property screening. Multiple regression analysis of data showed that the coefficient determination (R2) was appropriate for the second-order model. The anticandidal property of the seaweed extract composition of 10 mg ml-1 G. arquata extract, 5 mg ml-1 N. zanardini extract, 4.5 mg ml-1 C. indica extract and 2 mg ml-1 P. australis extract was found to be optimal. Under the optimized composition, the Candida albicans growth inhibition zone was 26.23 mm. The experimental yield was well matched with the predicted yield.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Adsorption and Desorption of Sulfur Compounds by Improved Nano Adsorbent: Optimization Using Response Surface Methodology

Today, sulfur removal from fuels has improved by new adsorbents such as zeolites that needs extensive studies. This study investigates the feasibility of sulfur compounds adsorption on improved nano zeolite existing in organic fuels and desorption of them from nano-adsorbent.Some properties of improved nano zeolite were analyzed to receive better sulfur compounds adsorption.<e...

متن کامل

Optimization and Modeling of CuOx/OMWNT’s for Catalytic Reduction of Nitrogen Oxides by Response Surface Methodology

A series of copper oxide (CuOx) catalysts supported by oxidized multi-walled carbon nanotubes (OMWNT’s) were prepared by the wet impregnation method for the low temperature (200 °C) selective catalytic reduction of nitrogen oxides (NOx) using NH3 as a reductant agent in the presence of excess oxygen. These catalysts were characterized by FTIR, XRD, SEM-EDS, and H2-TPR meth...

متن کامل

preparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis

کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.

Statistical Optimization of Conditions for Maximize Production of Mannan by Saccharomyces Cerevisiae Using Response Surface Methodology

In view of the increase in Saccharomyces cerevisiae mannan content, the culture condition for S.cerevisiae were optimized in this study. The influence of culture condition such as original pH, inoculum size, and temperature on mannan production were evaluated using Response surface methodology. The mathematical model was established by the quadratic rotary combination design. with the order of ...

متن کامل

Statistical Optimization of Conditions for Maximize Production of Mannan by Saccharomyces Cerevisiae Using Response Surface Methodology

In view of the increase in Saccharomyces cerevisiae mannan content, the culture condition for S.cerevisiae were optimized in this study. The influence of culture condition such as original pH, inoculum size, and temperature on mannan production were evaluated using Response surface methodology. The mathematical model was established by the quadratic rotary combination design. with the order of ...

متن کامل

Synthesis of nano-structured sphene and mechanical properties optimization of its scaffold via response surface methodology

Nano-structured sphene (CaTiSiO5) powder was synthesized via mechanical activation and heat treatment method. The synthesized powder was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and simultaneous thermal analysis (STA). The sphene scaffolds were then fabricated via porogen method (using citric acid). Response surface methodology was successfully used to d...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 19  شماره 2

صفحات  881- 892

تاریخ انتشار 2020-03

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023