TATB Interaction with Carbon Nanocone and Nanocone Sheet: A Comprehensive Computational Study

نویسندگان

  • Maryam Ebrahimikia Department of chemistry, Islamshahr Branch, Islamic Azad University, Islamshahr, Iran
  • Mohammad Yari Department of chemistry, Islamshahr Branch, Islamic Azad University, Islamshahr, Iran
  • Sheila Kumer Institute of Physic of the Czech Academy of Sciences, Na Slovance 2, 182 21 Prague, Czech Republic
چکیده مقاله:

In this study 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) interaction with carbon nanocone(NC) and nanocone Sheet (NCS) was evaluated by density functional theory. The calculated thermodynamic parameters including Gibbs free energy changes and Enthalpy alterations showed the interaction of TATB with the both nanostructures are exothermic, spontaneous, experimentally possible and irreversible. The specific heat capacity values proved the heat sensitivity of TATB decline after its adsorption on the surface of carbon nanocone and nanocone sheet. The effect of temperature on this process was also investigated and the results indicated 300 K is the optimum temperature for the interaction of TATB with the nanostructures. The frontier molecular orbital analysis was also employed and the findings indicated the reactivity and energetic traits of TATB have enhanced significantly after its interaction with carbon nanocone and nanocone sheet. Indeed, both of the nanostructures cause a substantial improvement in energetic features and a tangible decrease in the heat sensitivity.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Enhanced Mechanical Stability of Gold Nanotips through Carbon Nanocone Encapsulation

Gold is a noble metal that, in comparison with silver and copper, has the advantage of corrosion resistance. Despite its high conductivity, chemical stability and biocompatibility, gold exhibits high plasticity, which limits its applications in some nanodevices. Here, we report an experimental and theoretical study on how to attain enhanced mechanical stability of gold nanotips. The gold tips w...

متن کامل

Hough Transform-based Technique for Automated Carbon Nanocone Segmentation

A new technique to automatically segment the L-shaped carbon nanocone structures from Transmission Electronic Microscopy (TEM) images is described. The technique enables robust segmentation of the structures by exploiting a simplified Generalized Hough Transform (HT)-based processing. Exploitation of parallelism on commodity hardware is also explored for efficient processing. Effectiveness of t...

متن کامل

Adsorption of Tetryl on the Surface of Carbon Nanocone: A Theoretical Investigation

 In this paper, the performance of carbon nanocone as an ideal adsorbent and sensing material for tetryl was investigated by density functional theory. For this aim, the structures of tetryl, carbon nanocone and their complexes were optimized geometrically. Afterwards, IR and FMO computations were done on them. The obtained thermodynamic parameters showed the interaction of car...

متن کامل

Gold nanocone near-field scanning optical microscopy probes.

Near-field scanning optical microscopy enables the simultaneous topographical and subdiffraction limited optical imaging of surfaces. A process is presented for the implementation of single individually engineered gold cones at the tips of atomic force microscopy cantilevers. These cantilevers act as novel high-performance optical near-field probes. In the fabrication, thin-film metallization, ...

متن کامل

Inverted nanocone-based thin film photovoltaics with omnidirectionally enhanced performance.

Thin film photovoltaic (PV) technologies are highly attractive for low-cost solar energy conversion and possess a wide range of potential applications from building-integrated PV generation to portable power sources. Inverted nanocones (i-cones) have been demonstrated as a promising structure for practical thin film PV devices/modules, owning to their antireflection effect, self-cleaning functi...

متن کامل

Highly-ordered silicon inverted nanocone arrays with broadband light antireflectance

In this work, highly-ordered silicon inverted nanocone arrays are fabricated by integration of nanosphere lithography with reactive ion etching (RIE) method. The optical characteristics of as-prepared Si inverted nanocone arrays are investigated both by experiments and simulations. It is found that the Si nanocone arrays present excellent broadband light antireflectance properties, which are at...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 7  شماره 1

صفحات  74- 86

تاریخ انتشار 2020-01-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023