Thermodynamic Investigation of Copper Removal From Liquid Slag.
نویسنده
چکیده مقاله:
The removal of copper dissolved in liquid stags by pyrometalIurgical means such as gaseous reduction and sulfidization is thermodynamically investigated. The lowest level possible for copper content is theoretically determined and compared. The results show that gaseous reduction is not as effective as sulfidization. Slags with very low levels of dissolved copper can be obtained with sulfide treatment. Effects of temperature, slag and matte composition have also been investigated.
منابع مشابه
Investigation of Rutting Performance of WMA Mixtures Containing Copper Slag
Copper slag (CS) is an abrasive blasting grit made of granulated slag from metal smelting processes. As copper slags are known to be waste material and cause a lot of environmental problems, it would be a good idea to use them in different sections of industry such as pavement construction. On the other hand, in order to save energy and reduce the amount of pollutants re...
متن کاملRecovery of Copper from Copper Slag and Copper Slag Flotation Tailings by Oxidative Leaching
Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...
متن کاملApplication of Copper Vanadate Nanoparticles for Removal of Methylene Blue from Aqueous Solution: Kinetics, Equilibrium, and Thermodynamic Studies
Copper vanadate nanoparticles were synthesized by a simple coprecipitation method in an aqueous medium and the products were used as adsorbents for eliminating methylene blue (MB) from water. The structure and morphology of the produced nanoparticles were evaluated through X-Ray Diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) analysis. The results...
متن کاملremoval of cadmium from industrial wastewater by steel slag
the steel slag is the main by-product of steel industry. the aim of this study using the steel slag as a low-cost absorbent in order to remove cadmium pollutant from industrial wastewater. some factors that affect the process of cadmium removal by steel slag such as ph, contact time, absorbent dosage and cadmium initial concentration has been studied. standard solution of synthetic wastewater i...
متن کاملRemoval of copper ions Cu (II) from industrial wastewater: A review of removal methods
Background and aims: Nowadays heavy metals are the environmental priority pollutants and are becoming as the most serious environmental problems. In recent years removing those from diverse industrial effluents and metal cleaning have been studied. The aim of the present study was to investigate the different methods for cooper removal of cooper ions from industrial wastewater....
متن کاملRemoval of Dibenzothiophene Using Activated Carbon/γ-Fe2O3 Nano-Composite: Kinetic and Thermodynamic Investigation of the Removal Process
In the present study, removal of dibenzothiophene (DBT) from model oil (n-hexane) was investigated using magnetic activated carbon (MAC) nano-composite adsorbent. The synthesized nano-composite was characterized by FT-IR, FE-SEM, BET and VSM techniques. The MAC nano-composite exhibited a nearly superparamagnetic property with a saturation magnetization (Ms) of 29.2 emu g-1...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 5 شماره 3
صفحات 99- 104
تاریخ انتشار 1992-11-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023