Using Burnett Equations to Derive an Analytical Solution to Pressure-Driven Gas Flow and Heat Transfer in Micro-Couette Flow

نویسندگان

  • Ahmad Reza Rahmati Department of Mechanical Engineering, University of Khashan, Kashan, Iran
  • Faezeh Nejati Barzoki Department of Mechanical Engineering, University of Khashan, Kashan, Iran
چکیده مقاله:

The aim of the present study is deriving an analytical solution to incompressible thermal flow in a micro-Couette geometry in the presence of a pressure gradient using Burnett equations with first- and second-order slip boundary conditions. The lower plate of the micro-Couette structure is stationary, whereas the upper plate moves at a constant velocity. Non-dimensional axial velocity and temperature profiles were obtained using the slip boundary conditions and were compared with the transition flow regime (0.1≤ Kn ≤10). The results showed that in this regime, rarefaction exerts a considerable effect on both the velocity and the temperature profiles. Because of the presence of the pressure gradient in the direction of the flow, the non-dimensional velocity and temperature profiles behave in a parabolic trend and flatten as the Knudsen number increases. The Poiseuille and Nusselt numbers, obtained using the derived analytical solution, decrease with increasing the Knudsen number. In the absence of an axial pressure gradient, the velocity profile behaves linearly and shows good agreement with the results of the previous works.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Entropy generation due to unsteady hydromagnetic Couette flow and heat transfer with asymmetric convective cooling in a rotating system

Entropy generation in an unsteady hydromagnetic Couette flow of a viscous incompressible electrically conducting fluid between two infinite horizontal parallel plates in a rotating system have been analyzed. Both the lower and upper plates of the channel are subjected to asymmetric convective heat exchange with the ambient following the Newton's law of cooling. A numerical solution for governin...

متن کامل

Numerical Study of Flow and Heat Transfer in a Square Driven Cavity

A numerical approach called “SIMPLER” is used to investigate the  flow and heat transfer characteristics in a square driven cavity. The two-dimensional incompressible Navier-Stokes equations were solved and the results are depicted as contour plots of stream function, vorticity, and total pressure for Reynolds numbers from 1 to 10000. At the higher values of Reynolds number, an inviscid core re...

متن کامل

Pressure Drop Measurements in Rectangular Micro - Channel Using Gas Flow

Due to the need for practical cooling technologies which could dissipate high heat fluxes, an experimental study of pressure drop in micro-channel was performed. In this work, laminar flow friction factors were determined using gas (air) as flow medium. Pressure drop vs flow rate data were used to evaluate friction factors in two parallel microchannels, namely MCP1 and MCP2 (1.0 mm deep x 0.240...

متن کامل

entropy generation due to unsteady hydromagnetic couette flow and heat transfer with asymmetric convective cooling in a rotating system

entropy generation in an unsteady hydromagnetic couette flow of a viscous incompressible electrically conducting fluid between two infinite horizontal parallel plates in a rotating system have been analyzed. both the lower and upper plates of the channel are subjected to asymmetric convective heat exchange with the ambient following the newton's law of cooling. a numerical solution for governin...

متن کامل

Numerical study of fluid flow and heat transfer in a gas-tank water heater

Influence of a vent hood at the exit of exhaust flue gas and flue baffles in the firetube on the temperature and flow fields of a gas tank water heater, as well as thestructure and amount of heat transferred to the water tank has been studiednumerically using two-dimensional steady state finite element simulation.Observations show that without a vent hood, there is a downward gas flow in theflu...

متن کامل

Investigation of fluid flow and heat transfer in tube hot metal gas forming process

In this study, hot metal gas forming process of AA6063aluminumtubeis studied with a focus on heat transfer of both fluid and solid phases numerically. An experimental study is simultaneously conducted to validate the numerical method. Some of the most important outputs of the present study, are velocity distribution of fluid inside the tube as well as the fluid in the gap between tube and matri...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 5  شماره 2

صفحات  87- 94

تاریخ انتشار 2018-10-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023