ZnO/bentonite Nanocomposites Prepared with Solid-state Ion Exchange as Photocatalysts

نویسندگان

  • Atabak Feizi Department of Civil Engineering, University of Mohaghegh Ardabili, Ardabil, Iran.
  • Bahareh Hakimi Department of Chemical Engineering, University of Mohaghegh Ardabili, Ardabil, Iran.
چکیده مقاله:

Photocatalyst nanocomposites of ZnO/bentonite clay are synthesized by Solid-state ion exchange method. Ion exchange intercalation process of clays is used to incorporate the catalyst into the basal space of the layered structure of clays. The purpose of this study is to find a new method, which is focused on simplifying and saving time to prepare ZnO-bentonite composite with photocatalyst property. The synthesis of ZnO-doped bentonite nanocomposite is accomplished by placing bentonite in a melting bath of ZnSO4 for 10, 20, 40, 60 and 90 min. The nanocomposites are characterized by morphological (SEM), optical (UV/vis reflection) and analytical (EDX) techniques. According to SEM results, after ion exchanging, the parent structure of bentonite remains and only the distance between flakes increased significantly. EDX analysis clearly suggest the success of ion exchange of the expense of Ca2+, Na+ and Mg2+ cations with Zn2+. The calculated band gap for the composites were 3.14 eV (10 min), 2.64 eV (20 min) and 2.54 eV at longer times, respectively. All the prepared composites showed acceptable degradation performances. The greatest photocatalytic activity is detected in ZnO/bentonite composite solid-state ion exchanges which lasts 60 and 90 min. Leaching test results showed that the concentrations of Zn are less than 4 mg/l between 0 and 6 h. These results indicated that the photocatalytic property of composites would last longer.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Comparative Study of Photocatalytic Activity of ZnO/activated Carbon Nanocomposites Prepared by Solid-state and Conventional Precipitation Methods

ZnO/activated carbon nanocomposites (ZnO/ACns) were synthesized by applying two different solid-state and precipitation methods. Precipitation method was initiated with zinc chloride and sodium hydroxide as starting materials in the presence of activated carbon. The synthesized sample was calcined at 250 °C for 1 h. The preparation of nanocomposite by solid-state method was accomplished by heat...

متن کامل

Chemically bonded graphene/BiOCl nanocomposites as high-performance photocatalysts.

After the successful solvothermal synthesis of graphene (GR) from ethanol and sodium, we obtained chemically bonded graphene/BiOCl (GR/BiOCl) nanocomposite photocatalysts via a facile chemical-bath method. A significant enhancement was observed in the photodegradation of methylbenzene, which was largely ascribed to the chemical coupling effects between Bi and C, as shown by X-ray photoelectron ...

متن کامل

Ion-beam Mixing and Solid-state Reaction

Vapor-deposited Zr-Fe multilayered thin films with various wavelengths and of overall composition either 50% Fe or Fe-rich up to 57 % Fe were either irradiated with 300 keV Kr ions at temperatures from 25K to 623 K to fluences up to 2 x 10l6 cm-2, or simply annealed at 773K in-situ in the Intermediate Voltage Electron Microscope at Argonne National Laboratory. Under irradiation, the final react...

متن کامل

Solid State Porphyrin Based Mercury Ion Sensors

Among the heavy metals, mercury is often considered the most toxic; moreover, current methods used to sense and quantitate mercury in the environment are expensive and labor intensive. In response, the sensor community has sought new approaches to detect and quantitate mercury. One such approach is the use of porphyrins as selective reagents for the detection of mercury. Porphyrins have shown g...

متن کامل

Mechanochemical Synthesis of TiO2 Nanocomposites as Photocatalysts for Benzyl Alcohol Photo-Oxidation

TiO₂ (anatase phase) has excellent photocatalytic performance and different methods have been reported to overcome its main limitation of high band gap energy. In this work, TiO₂-magnetically-separable nanocomposites (MAGSNC) photocatalysts with different TiO₂ loading were synthesized using a simple one-pot mechanochemical method. Photocatalysts were characterized by a number of techniques and ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 51  شماره 2

صفحات  139- 146

تاریخ انتشار 2018-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023