Seyed Ali Hosseini
Department of Applied Chemistry, Faculty of Chemistry, Urmia University, Urmia, Iran.
[ 1 ] - Adsorptive desulfurization of oil derivatives using nanostructured Mg-Al layered double hydroxides: Experimental design and modeling
This study focuses on the application of nanostructured Mg-Al layered double hydroxide as a promising adsorbent in desulfurization of dibenzothiophene, an aromatic sulfur bearing compound from gasoil model. The Mg-Al LDH was synthesized by a co-precipitation method and characterized by FT-IR, XRD, EDX and SEM. The XRD and FT-IR approved the layered structure and crystalline form of the adsorben...
[ 2 ] - Photocatalytic degradation of rhodamine B by nano bismuth oxide: Process modeling by response surface methodology (RSM)
The photocatalytic activity of nano-Bi2O3 was evaluated in degradation of rhodamine B (RhB) as a model of dye pollutant from waste waters. Nano sized Bi2O3 was synthesized using the chemical precipitation method. The as-prepared sample was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spect...
[ 3 ] - Study of acetylation of benzylic alcohols over BiFeO3, Bi0.86Sm0.07Eu0.07FeO3, and Bi0.86Sm0.07Cd0.07FeO3 nano powders
BiFeO3 (BFO), Bi0.86Sm0.07Eu0.07FeO3 (BSEFO), and Bi0.86Sm0.07Cd0.07FeO3 (BSCFO) nano powders were prepared by the sol-gel combustion method and the catalytic performances were evaluated in the acetylation reaction of benzyl alcohol. The physical chemical properties of the catalysts were character...
[ 4 ] - Study of catalytic performance of LaMnO3 and LaMnO3-ZSM-5 nanocatalysts toward 2-propanol conversion
LaMnO3 and LaMnO3/ZSM-5 nano catalysts were synthesized by Pechini method and their physical-chemical properties were characterized using XRD, FTIR, SEM-EDX, UV-vis DRS, BET surface area and TPR. The correlation between characteristic properties and activity of catalysts were investigated. The catalytic performance of the catalysts was evaluated in combustion of 2-propanol...
[ 5 ] - Investigation of Performance of Ni / Clinoptilolite Nanoadsorbents in Desulfurization of Gas Oil: Experimental Design and Modeling
The removal of sulfur compounds from petroleum is extremely necessary for industrial and environmental reasons. Sulfur in transportation fuels is a major air pollution source. In this work, the efficiency of nanostructured Ni-clinoptilolite adsorbent was investigated in the removal of sulfur from gas oil. For this purpose, the design of experiments was performed by selecting effective factors i...
[ 6 ] - آلومینا، روشهای تهیه و خواص سطحی آن
اکسید آلومینیوم یکی از ترکیبات غیرآلی با فرمول شیمیایی Al2O3 می باشد که نام‌های تجاری متنوعی مانند آلومینا ، کوراندوم وغیره دارد. این ماده دارای دمای ذوب بسیار بالایی در حدود 2054 درجه سانتیگراد و از لحاظ شیمیایی بسیار پایدار است .این ویژگی باعث می شود تا از این ماده در کاربردهایی استفاده شود که در آن نیاز به تحمل دمایی بالاست. از این ماده همچنین به عنوان پایه کاتالیست و کاشت بیولوژیکی نیز استف...
[ 7 ] - Adsorptive desulfurization of oil derivatives using nanostructured Mg-Al layered double hydroxides: Experimental design and modeling
This study focuses on the application of nanostructured Mg-Al layered double hydroxide as a promising adsorbent in desulfurization of dibenzothiophene, an aromatic sulfur bearing compound from gasoil model. The Mg-Al LDH was synthesized by a co-precipitation method and characterized by FT-IR, XRD, EDX and SEM. The XRD and FT-IR approved the layered structure and crystalline form of the adsorben...
[ 8 ] - Photocatalytic degradation of rhodamine B by nano bismuth oxide: Process modeling by response surface methodology (RSM)
The photocatalytic activity of nano-Bi2O3 was evaluated in degradation of rhodamine B (RhB) as a model of dye pollutant from waste waters. Nano sized Bi2O3 was synthesized using the chemical precipitation method. The as-prepared sample was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spect...
[ 9 ] - Study of acetylation of benzylic alcohols over BiFeO3, Bi0.86Sm0.07Eu0.07FeO3, and Bi0.86Sm0.07Cd0.07FeO3 nano powders
BiFeO3 (BFO), Bi0.86Sm0.07Eu0.07FeO3 (BSEFO), and Bi0.86Sm0.07Cd0.07FeO3 (BSCFO) nano powders were prepared by the sol-gel combustion method and the catalytic performances were evaluated in the acetylation reaction of benzyl alcohol. The physical chemical properties of the catalysts were character...
[ 10 ] - Study of catalytic performance of LaMnO3 and LaMnO3-ZSM-5 nanocatalysts toward 2-propanol conversion
LaMnO3 and LaMnO3/ZSM-5 nano catalysts were synthesized by Pechini method and their physical-chemical properties were characterized using XRD, FTIR, SEM-EDX, UV-vis DRS, BET surface area and TPR. The correlation between characteristic properties and activity of catalysts were investigated. The catalytic performance of the catalysts was evaluated in combustion of 2-propanol...
[ 11 ] - Layered double hydroxides: Novel nanocatalysts for combustion of gaseous toluene from polluted air
The catalytic performance of Ni-Al, Mg-Al, and Co-Ni LDHs as novel nanocatalysts was evaluated in the oxidation of toluene. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). The XRD and FTIR approved the structure and functional groups of the LDH, respectively. Also, the presence of cations with dif...
نویسندگان همکار