A. Niaei
Faculty of Chemical Engineering, University of Tabriz, Tabriz, Iran
[ 1 ] - CFD modeling for selective formation of propylene from methanol over synthesized Mn-substituted MFI metallosilicate catalyst
The high silica Mn-substituted MFI metallosilicate catalyst with Si/Al molar ratio of 220 and Si/Mn molar ratio of 50 was successfully synthesized by hydrothermal method. The catalyst sample was appropriately characterized by XRD, FE-SEM, EDX and BET techniques. The Mn-substituted MFI metallosilicate has not been reported as the potential catalyst for the methanol to propylene (MTP) reaction. T...
[ 2 ] - Synthesis and characterization of MFI zeolite nanosheets for optimizing the dominant operational conditions of methanol to propylene process
Nanosheets of MFI zeolite were successfully synthesized by hydrothermal method and were properly characterized by XRD, FE-SEM, EDX-dot mapping, TEM, FT-IR, N2 adsorption/desorption, NH3-TPD, ICP-AES and TGA techniques. The characterizations of MFI zeolite nanosheets suitably confirmed well synthesized MFI nanostructure, superior specific surface area (695.96m2.g-1) and great mesopores volume. C...
[ 3 ] - Layered double hydroxides: Novel nanocatalysts for combustion of gaseous toluene from polluted air
The catalytic performance of Ni-Al, Mg-Al, and Co-Ni LDHs as novel nanocatalysts was evaluated in the oxidation of toluene. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). The XRD and FTIR approved the structure and functional groups of the LDH, respectively. Also, the presence of cations with dif...
نویسندگان همکار