رضا علیزاده
عضو هیئت علمی دانشگاه صنعتی سهند
[ 1 ] - بررسی تجربی و مدلسازی جذب سولفید هیدروژن در برج های سیم مرطوب بوسیله محلول آمین
جذب سولفیدهیدروژن توسط محلولهای آمین، یکی از فرآیندهای با اهمیت در واحدهای پالایشگاهی است. برجهای سینیدار و پرشده از تجهیزات متداول در زمینه جذب سولفیدهیدروژن هستند. برای مدلسازی اینگونه تجهیزات مدلهای تعادلی و بر پایه سرعت می‌تواند مورد استفاده قرار گیرد. با توجه به اینکه جذب سولفیدهیدروژن توسط محلولهای حاوی آمین بهصورت واکنشی است، استفاده از مدلهای تعادلی نتایج دقیقی بهدست نخواهد ...
[ 2 ] - Mathematical modeling and optimization of sonication remediation of soil polluted with 2-methylpropane-2-thiol
Existence of 2-methylpropane-2-thiol as an organosulfur and odorant compound in the soil could causes environmental problem and social dissatisfaction. In this study, remediation of this type of thiol using ultrasound is investigated. Central Composite Design (CCD) based on Response Surface Model (RSM) was used to obtain effects of the main factor (Power, sonication time and amount of water) an...
[ 3 ] - Evaluation of Spent Catalyst Structure Changes during Ethylbenzene Dehydrogenation in Different Technologies
Ethylbenzene (EB) dehydrogenation to styrene (SM) on an industrial scale is generally performed using classic and SMART (Styrene Monomer Advanced Reheat Technology) technologies. In the current study, spent catalysts structural changes through classic and SMART technologies were investigated and compared with the fresh catalyst. For this purpose, XRF, XRD, SEM-EDX, FT-IR, BET and crushing s...
[ 4 ] - Comparison of central composite design and artificial neural network approaches for modeling and optimization of 2-methylpropane-2-thiol removal from contaminated soil by ultrasound
In this article a comparative study for modeling and optimization of 2-methylpropane-2-thiol removal from contaminated soil by ultrasound is investigated. Central Composite Design (CCD) and artificial neural network (ANN) were utilized and compared to each other in order to obtain appropriate predicting model with respect to sonication power (w), sonication time (min) and water/reactor volume r...
[ 5 ] - CFD modeling for selective formation of propylene from methanol over synthesized Mn-substituted MFI metallosilicate catalyst
The high silica Mn-substituted MFI metallosilicate catalyst with Si/Al molar ratio of 220 and Si/Mn molar ratio of 50 was successfully synthesized by hydrothermal method. The catalyst sample was appropriately characterized by XRD, FE-SEM, EDX and BET techniques. The Mn-substituted MFI metallosilicate has not been reported as the potential catalyst for the methanol to propylene (MTP) reaction. T...
[ 6 ] - Thermodynamic and Heat Transfer Evaluation of Pocket Drying Section in the Multi-Cylinder Dryers of Paper Machine
In this study a developed model has been used to evaluate the paper drying process and examine the pocket dryer conditions of a multi-cylinder fluting paper machine. The model has been developed based on the mass and energy balance relationships in which the heat of sorption and its variations with paper temperature and humidity changes have been taken into account. The applied model can be use...
[ 7 ] - مروری بر دیرسوزکننده‌ها و سازوکارهای عملکرد آن‌ها در پلیمرها و پوشش‌ها
دیرسوزکننده‌ها ترکیباتی هستند که برای اصلاح خواص اشتعال‌پذیری پلیمرها به آن‌ها افزوده می‌شوند. مواد مختلفی از جمله ترکیبات فسفردار، هالوژن‌دار، انواع اکسیدها و هیدروکسیدهای فلزی به عنوان دیرسوزکننده مورد استفاده قرار می‌گیرد که هر یک مکانیسم خاصی برای عملکرد دارند ولی مکانیسم‌های کلی دیرسوزکنندگی، عملکرد در فاز گاز و فاز جامد می‌باشد. برخی از این مواد تنها دارای یک مکانیسم هستند ولی عمدتاً از هر...
[ 8 ] - Synthesis and characterization of MFI zeolite nanosheets for optimizing the dominant operational conditions of methanol to propylene process
Nanosheets of MFI zeolite were successfully synthesized by hydrothermal method and were properly characterized by XRD, FE-SEM, EDX-dot mapping, TEM, FT-IR, N2 adsorption/desorption, NH3-TPD, ICP-AES and TGA techniques. The characterizations of MFI zeolite nanosheets suitably confirmed well synthesized MFI nanostructure, superior specific surface area (695.96m2.g-1) and great mesopores volume. C...
نویسندگان همکار