Aliasghar Ataee
School of Mechanical Engineering, College of Engineering, University of Tehran, Iran.
[ 1 ] - Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization
In this paper, multi-objective optimization of railway wheel web profile using bidirectional evolutionary structural optimization (BESO) algorithm is investigated. Using a finite element software, static analysis of the wheel based on a standard load case, and its modal analysis for finding the fundamental natural frequency is performed. The von Mises stress and critical frequency as the proble...
[ 2 ] - Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials
In this paper, the effect of autofrettage process parameters on the ultimate pressure that functionally graded spherical vessel can tolerate are investigated. FGM properties and autofrettage pressure are considered as important parameters. Assumptions are variation of properties of FGM in radial direction, the residual stress in the absence of Bauschinger effect with the operation of variable m...
[ 3 ] - Numerical and Experimental Analysis and Optimization of Process Parameters of AA1050 Incremental Sheet Forming
The incremental sheet metal forming (ISMF) process is a new and flexible method that is well suited for small batch production or prototyping. This paper studies the use of the finite element method in the incremental forming process of AA1050 sheets to investigate the influence of tool diameter, vertical step size, and friction coefficient on forming force, spring-back, and thickness distribut...
[ 4 ] - بررسی تعادل شبکه های کابلی الاستیک خطی با استفاده از کمینه سازی انرژی پتانسیل
استفاده از اصل حداقل انرژی پتانسیل کل1 از جمله روشهای رایج در بررسی وضعیت تعادل سازه ها به شمار می آید. در این روش که جایگزینی برای حل مستقیم معادلات تعادل سازه بصورت تحلیلی و یا با استفاده از روش های عددی نظیر روش اجزای محدود به شمار می آید، انرژی پتانسیل کل سازه با استفاده از روش های بهینه سازی کمینه شده و نیروها و تغییر شکل ها در اعضای سازه در حال تعادل تعین می گردند. در خصوص سازه های کابلی ...
[ 5 ] - EFFICIENT SIMULATION FOR OPTIMIZATION OF TOPOLOGY, SHAPE AND SIZE OF MODULAR TRUSS STRUCTURES
The prevalent strategy in the topology optimization phase is to select a subset of members existing in an excessively connected truss, called Ground Structure, such that the overall weight or cost is minimized. Although finding a good topology significantly reduces the overall cost, excessive growth of the size of topology space combined with existence of varied types of design variables challe...
[ 6 ] - Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables
Structures consisting of cables and membranes have been of interest to engineers due to their higher ratio of strength to weight and lower cost compared to other structures. One of the challenges in such structures is presence of holes in membranes, which leads to non-uniform stress and strain distributions, even under uniform far-field deformations. One of the approaches suggested for controll...
نویسندگان همکار