Farhad Khoshnam
Department of Mechanical Engineering of Biosystems, Faculty of Agricultural, University of Jiroft
[ 1 ] - Numerical investigation on Effect of thermally isolated piston on improving SI engine performance during the cold start conditions
In low ambient temperatures the engine will have poor output torque and power generation at the first cycles of its performance, long start time and huge noxious emissions because of insufficient temperature and quality of air-fuel mixture and failure of flame to burn the charge. It is noted that any attempt to increase the charge temperature leads to better combustion conditions. By applying t...
[ 2 ] - Evaluating the coupled thermo-mechanical stresses for an aluminum alloy piston used in a gasoline engine XU7
In modern engines with higher compression ratios, severe pressures and non-uniform heating up is occurred for the engine parts. The piston as the most critical part among all automotive components has been the subject of numerous studies on calculation of temperature distribution, but thermal stress analyses are limited. In this study, the piston of gasoline engine XU7 which is widespread in Ir...
[ 3 ] - Evaluating the Effects of Ceramic Layer and Thermal Dam on Optimizing the Temperature Gradient of a Gasoline Engine Piston (TECHNICAL NOTE)
The purpose of this paper is to evaluate the effect of different methods for improving the temperature gradient of a specified gasoline engine piston. With a robust FE based software, 3D thermal analyses have been carried out for the piston model. Unlike previous studies, the effects of both fully and locally ceramic layers on the crown top surface were considered. It was found that a fully cer...
نویسندگان همکار