The effects of aggregate characteristics on flow ability of mortar mixtures were investigated. Two types, five single sizes, and three gradations of fine aggregate were considered. Uncompacted voids of the aggregates were measured. Flow properties of 166 mortar batches made with the aggregates, together with different sand-to-cement ratios (s/c) and water-to-cement ratios (w/c), were evaluated ...

The results of oneand two-dimensional H nuclear magnetic resonance (NMR) pulsed field gradient (PFG) diffusometry studies of water in white cement paste with a water-tocement ratio 0.4 and aged from 1 day to 1 year are reported. The study shows that the NMRPFG method is primarily sensitive to the capillary porosity. Data is fit on the basis of a lognormal pore size distribution with pore size d...

BACKGROUND Cement injection into osteolytic areas around the cement mantle is a technique for refixation of loose hip implants for patients who cannot undergo standard revision surgery. Preliminary clinical results show the improvement in walking distance, patients' independence and pain relief. METHODS In this study, we use a detailed finite element model to analyze whether cement injection ...

Particle size soft sensing in cement mills will be largely helpful in maintaining desired cement fineness or Blaine. Despite the growing use of vertical roller mills (VRM) for clinker grinding, very few research work is available on VRM modeling. This article reports the design of three types of feed forward neural network models and least square support vector regression (LS-SVR) model of a VR...

Current ASTM standards can be used to provide a degree of characterization of geopolymeric materials, yet the researcher must be aware of differences between hydraulic and geopolymer cementitious materials. The current study assessed the applicability of available ASTM standards that analyze the insoluble content and oxide content of cementitious materials (ASTM C114 and C311), compressive stre...

Different mineral admixtures of Indian metakaolin, Iranian silica fume and nanosilica were used to produce high performance mortars. Two different sands types with grain size of 0.015-4mm were mixed with type II Portland cement, polycarboxylate superplasticizer,mineral admixture with 650kg/m3 cement content and water/cement ratio of 0.35. Different amount of cement was replaced by metakaolin or...

a r t i c l e i n f o A hydration kinetics model for Portland cement is formulated based on thermodynamics of multiphase porous media. The mechanism of cement hydration is discussed based on literature review. The model is then developed considering the effects of chemical composition and fineness of cement, water–cement ratio, curing temperature and applied pressure. The ultimate degree of hyd...