In this study, the adsorption behavior of natural (clinoptilolite) zeolites with respect to Co(2+), Cu(2+), Zn(2+), and Mn(2+) has been studied in order to consider its application to purity metal finishing wastewaters. The batch method has been employed, using metal concentrations in solution ranging from 100 to 400 mg/l. The percentage adsorption and distribution coefficients (K(d)) were dete...

Carbon based composites have good capability for elimination of colored pollutants. In this work, a multi-walled carbon nanotube-graphite Composite (MW-g-C) was prepared using a sol gel method. The N2 adsorption/desorption curves, scanning electron microscopy and zeta potential were used for characterization of MW-g-C. The adsorption characteristics of MW-g-C were studied using Basic Blue 41 (B...

In this study, ZIF-67 was synthesized through solvothermal method to remove Cr(VI) ions from aqueous solution. To improve the structural properties of ZIF-67 and its adsorption capacity, optimization of the synthesis conditions was carried out based on maximum Cr(VI) uptake. From experiments, the optimum condition was revealed as solvent: metal ion molar ratio of 4.6:1, ligand: metal ion molar ...

Isotherms of Zn 2+ ions adsorption by native and 3% H 2 SO 4 solution-treated leaves Acacia auriculiformis were plotted. The resulting isotherms processed using the Langmuir, Freundlich, Dubinin-Radushkevich Temkin models. It was found that these with earleaf acacia are most accurately described model modified Langmuir model. modification a solution contributes to an increase in maximum sorptio...

Adsorption is considered to be one of the most effective technologies widely used in global environmental protection areas. Modeling of experimental adsorption isotherm data is an essential way for predicting the mechanisms of adsorption, which will lead to an improvement in the area of adsorption science. In this paper, we employed three isotherm models, namely: Langmuir, Freundlich, and Dubin...

the used activated carbon was derived from pine-cone and was used for the removal of acid black 1(ab1) and acid blue 113(ab113) dyes. a batch sorption study was carried out in order to obtain optimum isotherm model. the study showed the best fit of the adsorption isotherm data was obtained using the langmuir model for both dyes. the monolayer maximum saturation capacities of ab1 and ab113 dyes ...

This article describes the use of a power plant waste-Bottom Ash, as effective adsorbent for the removal of toxic Azo dyes Carmoisine and Chrysoidine Y from their aqueous solution. The paper incorporates comparative study and discussion of the adsorption characteristics of these dyes on the economically effective adsorbent with special emphasis on the effects of time and temperature. The charac...

In this study, the adsorption behavior of zeolites A and X, which are prepared from very cheap local Egyptian clay (kaolin), with respect to Cu(2+), Cd(+2), Cr(+2), Ni(+2) and Zn(2+) has been studied. The batch method has been employed, using metal solutions ranging from 100 to 400 mg/L. The distribution coefficients (K(d)) and adsorption percent were determined for the adsorption system as a f...