Understanding the behaviour of mechanical systems can be facilitated and improved by employing electro-mechanical analogies. These analogies enable the use of network analysis tools as well as purely analytical treatment of the mechanical system translated into an electric circuit. Recently, we developed a novel kind of sensor set-up based on two coupled cantilever beams with matched resonance ...

In this study, the vibration behavior of functional graded (FG) circular and annular nanoplate embedded in Visco-Pasternak foundation and coupled with temperature change is studied. It is assumed that a uniform radial magnetic field acts on the top surface of the plate and the magnetic permeability coefficient of the plate along its thickness are assumed to vary according to the volume distribu...

the effect of mechanical activation on structural changes and kinetics of carbothermic reduction of hematite with graphite was studied in this research. hematite powder mixture with graphite (with stoichiometry ratio c/o=1) was milled for the time periods of zero to 50 hours, and the structural changes were studied using x ray diffraction (xrd). the effect of mechanical activation on the kineti...

resistance spot welding is an important manufacturing process in the automotive industry for assembling bodies. the quality and strength of the welds and, by extension, the body is mainly defined by the quality of the weld nuggets. the most effective parameters in this process are sheet material, geometry of electrodes, electrode force, current intensity, welding time and sheet thickness. the p...

the well-known electro-mechanical analogy that equates current, voltage, resistance, inductance and capacitance to force, velocity, damping, spring constant and mass has a shortcoming in that mass can only be used to simulate a capacitor which has one terminal connected to ground. a new model that was previously proposed by the authors that combines a mass with a pulley (mp) is shown to simulat...

Mechanical redundancy within a biomechanical system (e.g., many-to-one mapping) allows morphologically divergent organisms to maintain equivalent mechanical outputs. However, most organisms depend on the integration of more than one biomechanical system. Here, we test whether coupled mechanical systems follow a pattern of amplification (mechanical changes are congruent and evolve toward the sam...

During quenching, hot rolled steel rings, especially those with a large outer diameter to wall thickness ratio, distort and develop undesired residual stresses. These phenomena are the result of three major mechanisms: metallurgical, mechanical and thermal. This paper presents the result of a comprehensive study on the heat treatment of rings by modeling via Finite Element Analysis. The simulat...

In the present study, nonlinear vibration of coupled carbon nanotubes (CNTs) in presence of surface effect is investigated based on nonlocal Euler-Bernoulli beam (EBB) theory. CNTs are embedded in a visco-elastic medium and placed in the uniform longitudinal magnetic field. Using von Kármán geometric nonlinearity and Hamilton’s principle, the nonlinear higher order governing equations are deriv...

Abstract A coupled bio-chemo-hydro-mechanical model (BCHM) is developed to investigate the permeability reduction and stiffness improvement in soil by microbially induced calcite precipitation (MICP). Specifically, our based on geometric method a link between micro- macroscopic features generated. This allows capture material property changes caused variations microstructure during MICP. The wa...