Fish oil was extracted from the viscera of African Catfish using supercritical carbon dioxide (SC-CO(2)). A Central Composite Design of Response Surface methodology (RSM) was employed to optimize the SC-CO(2) extraction parameters. The oil yield (Y) as response variable was executed against the four independent variables, namely pressure, temperature, flow rate and soaking time. The oil yield v...

Supercritical carbon dioxide (SC-CO(2)) extraction of oil from oak silkworm pupae was performed in the present research. Response surface methodology (RSM) was applied to optimize the parameters of SC-CO(2) extraction, including extraction pressure, temperature, time and CO(2) flow rate on the yield of oak silkworm pupal oil (OSPO). The optimal extraction condition for oil yield within the expe...

In air/oil lubrication systems, the flow parameters, e.g., flow pattern, liquid film thickness, and air/oil flow rate, are of great importance to the transportation efficiency. In most cases, the on-going two-phase flow is annular flow with the oil moving along the tube wall and the air travelling at high speed in the center. This usually results in the formation of a thin oil film, the thickne...

To fully understand the environmental and ecological impacts of the Deepwater Horizon disaster, an accurate estimate of the total oil released is required. We used optical plume velocimetry to estimate the velocity of fluids issuing from the damaged well both before and after the collapsed riser pipe was removed. We then calculated the volumetric flow rate under a range of assumptions. With a l...

in this contribution, linearized dynamic model of cumulative mass fraction (cmf) of potassium nitrate-water seeded continues mixed suspension mixed product removal (cmsmpr) crystallizer is approximated by a simplified model in frequency domain. frequency domain model simplification is performed heuristically using the frequency response of the derived linearized models data. however, the cmf fr...

In the present paper, the effect of water-CuO nanofluid on the radiator heat transfer of an automobile, Peugeot 405 XU7 engine type is investigated experimentally. The experiments are carried out for the radiator water (water-ethylene glycol with a volume fraction of 80-20, respectively) as a base fluid and water-CuO nanofluid with the volume fraction of 0.5% and 1%. Sodium Dodecyl Sulfate (SDS...

In this paper, we have considered the problem of rotating, magnetohydrodynamic heat and mass transfer by free convective flow past an exponentially accelerated isothermal vertical plate in the presence of variable mass diffusion. While the temperature of the plate is constant, the concentration at the plate is considered to be a linear function with respect to time t. The plate is assumed to be...

Multiphase flow meters (MPFMs) are utilized to provide quick and accurate well test data in numerous numbers of oil production applications like those in remote or unmanned locations topside exploitations that minimize platform space and subsea applications. Flow rates of phases (oil, gas and water) are most important parameter which is detected by MPFMs. Conventional MPFM data collecting is do...

To take capillary effect into account, a series of primary drainage experiments of water by a sample oil fluid have been studied. The experiments performed under different low flow rates on a horizontal glass type micromodel as a model of porous media. Based on conventional macroscopic flow equations, the relative permeabilities and capillary pressure are determined by parameter estimation tech...

A semi-analytical investigation has been carried out to analyze unsteady MHD second-grade flow under the Dual-Phase-Lag (DPL) heat and mass transfer model in a vertical microchannel filled with porous material. Diffusion thermo (Dufour) effects and homogenous chemical reaction are considered as well. The governing partial differential equations are solved by using the Laplace transform method w...