PURPOSE This study aimed to identify the effects of the sintering conditions of dental zirconia on the grain size and translucency. MATERIALS AND METHODS Ten specimens of each of two commercial brands of zirconia (Lava and KaVo) were made and sintered under five different conditions. Microwave sintering (MS) and conventional sintering (CS) methods were used to fabricate zirconia specimens. Th...

Selective electron beam melting (SEBM) is a relatively new additive manufacturing technology for metallic materials. Specific to this technology is the sintering of the metal powder prior to the melting process. The sintering process has disadvantages for post-processing. The post-processing of parts produced by SEBM typically involves the removal of semi-sintered powder through the use of a po...

We have studied the combined effects of the templated grain growth and magnetic alignment processes on sintering, anisotropic sintering shrinkage, microstructure development and texture in ZnO ceramics. Suspensions of 0-10 vol % ZnO template particles were slip cast in a 12 T rotating magnetic field. Sintering and texture characteristics were investigated via thermomechanical analysis and elect...

In this study, the procedure of sintering and heat treatment of Al2O3-SiC-MgO nanoceramic was considered. For improving the densification behavior and mechanical properties, experimental variables, such as sintering temperature and duration, which significantly influence the fracture performance of this nanocomposite body, were optimized. To obtain desired properties, several tests were conduct...

In an effort to extend the tempering methodology, we propose simulated sintering as a general framework for designing Markov chain Monte Carlo algorithms. To implement sintering, one identifies a family of probability distributions, all related to the target one and defined on spaces of different dimensions. Then, a Markov chain is constructed to move across these spaces, with the hope that the...

Electric current activated/assisted sintering (ECAS) techniques, such as electrical discharge sintering (EDS) or resistive sintering (RS), have been intensively investigated for longer than 50 years. In this work, a novel system including an electrically insulated graphite die for Spark Plasma Sintering (SPS) is described, which allows the sintering of any refractory ceramic material in less th...

When NiTi powder compacts containing Nb wires are heated above 1 170 8C, each Nb wire reacts with adjacent NiTi powders to form a eutectic liquid which wicks into the space between the remaining NiTi powders. This creates a macropore at the location of the Nb wire while eliminating the microporosity between NiTi powders which is filled with a NiTi/Nb eutectic phase after solidification. This no...

The effect of frequency and sintering temperature on initial permeability of Ni0.55Zn0.45Fe2O4 ferrites have been studied by using an impedance analyzer. The samples were prepared by conventional double sintering ceramic technique using oxide nanoparticles of grain size 30 50 nm. Single phase spinal structure has been confirmed for the prepared samples by X-ray diffraction. As the sintering tem...

In this study; iron based powder metal (PM) bushing compacts were sintered via medium frequency induction heating system. Iron based powders were mixed with 2 wt.% copper (Cu), 0.3 wt.% carbon (C) and 1 wt.% zinc stearat (Zn-st) via V-Type mixer. PM compacts were sintered by 2 different sintering processes. One of them was conventional sintering method other was medium frequency induction sinte...

CaO-P(2)O(5) glasses with additions of MgO and CaF(2) were used as a sintering aid of hydroxyapatite, and glass-reinforced hydroxyapatite composites obtained. Glasses promoted significant changes in the microstructure of the composites, namely with the formation of tricalcium phosphate secondary phases, beta and alpha-TCP. Quantitative phase analysis was performed by the Rietveld method using G...