Flame stabilization by swirl is a common feature of many combustors. While most of the swirl combustors are enclosed, there have been relatively few studies of open swirl-stabilized flames. In the current study, an open swirl-stabilized turbulent premixed flame is studied numerically. The purpose of this work is to obtain a better understanding of the flame properties by simulating the flow fie...

 This paper presents a mathematical model of the cylindrical particle combustion in a fluidized bed reactor. This particle is composed of sewage sludge. The model performs a mathematical description of the physical and chemical phenomena that occur during particle combustion. The uniform particle model without ash accumulation is proposed. Sewage sludge is considered composed of three fractio...

The flame propagation through a coal dust-air mixture in a spherical vessel was studied by means of a one-dimensional, Arrhenius-type kinetics and quasi-steady model. The model includes the evaporation of the volatile matter of dust particles into a known gaseous fuel (methane) and the single-stage reaction of the gas-phase combustion. Effect of venting devices as safety idea and the radiation ...

Homogeneous-charge compression ignition (HCCI) engines have been shown to have higher thermal efficiencies and lower NOx and soot emissions than spark ignition engines. However, HCCI engines experience very large heat release rates which can cause too rapid an increase in pressure. One method of reducing the maximum heat release rate is to introduce thermal inhomogeneities, thereby spreading th...

Diesel engine emission standards are being more stringent as it gains more publicity in industry and transportation. Hence, designers have to suggest new controlling strategies which result in small amounts of emissions and a reasonable fuel economy. To achieve such a target, multi-objective optimization methodology is a good approach inasmuch as several types of objective are minimized or maxi...

In relation to future energy demand and fossil fuel crisis particularly in India, biomass is gaining its importance for possible utilization as co-fuel. This study focuses the use of „low temperature biomass char‟ instead of raw biomass in the blends to extract some specific advantages like lowering of grinding energy, intensification of heat energy, proper adjustment of „VM and fuel ratio‟ etc...

The flame stability limit, which was involving the critical flow condition, lift off and blow out, could be affected by the burner geometry in the combustion system installation. Consequently a flame holder should be put in, to hold the flame as big as possible on a stable condition. The flame holder itself, is a device to hold the flame, whereas the flame holder could disturb the air and fuel ...

The present study is concerned with measuring and simulating soot formation and combustion in turbulent liquid fuel spray flames. Soot concentrations inside the combustor are measured by filter paper technique. The simulation is based on the solution of the fully-coupled conservation equations for turbulent flow, chemical species kinetic modeling, fuel droplet evaporation and combustion and...