The hollow-anode discharge is a special form of glow discharge. It is shown that a drastically reduced anode area is responsible for a positive anode voltage drop of 30-40 V and an increased anode sheath thickness. This leads to an ignition of a relatively dense plasma in front of the anode hole. Langmuir probe measurements inside a specially designed hollow anode plasma source give an electron...

There are several obstacles to the commercialization of PEM fuel cells.  One of the reasons is that the presence of carbon monoxide (CO) in the reformatted fuel, even at a very small scale, decreases the fuel cell performance. The aim of this paper is to investigate the effect of CO in reformatted fuel on PEM fuel cell performance. For this purpose, a steady state, one-dimensional and non-isoth...

We report on the analysis of the performance of each electrode of an air-breathing passive micro-direct methanol fuel cell (µDMFC) during polarization, stabilization and discharge, with CH3OH (2-20 M). A reference electrode with a microcapillary was used for separately measuring the anode the cathode potential. Information about the open circuit potential (OCP), the voltage and the mass transpo...

A silicon-based microfabricated fuel cell running on formic acid vapor as a fuel has been developed to provide on-chip power for MEMS devices, without using any ancillary devices such as heaters, water management, air pumps, etc. As a demonstration instrument, an integrated silicon-based membrane electrode assembly and fuel evaporative structure was packaged in a plastic package to test the vap...

Methanol is widely used in industrial processes, and as such, is discharged in large quantities in wastewater. Microbial fuel cells (MFCs) have the potential to recover electric energy from organic pollutants in wastewater; however, the use of MFCs to generate electricity from methanol has not been reported. In the present study, we developed single-chamber MFCs that generated electricity from ...

The aim of this study was to assess to which extent the modernisation of an anode plant had reduced occupational chemical health hazards for jobs with the highest potential of exposure. Periodical measurements of dust and gases were performed at the same workplaces using the same methods, before and after modernisation. These measurements were compared with the recommended standards. Before mod...

this study investigates the vertical replacement of salts, variability of electrical conductivity (ec) and soil acidity (ph) due to direct electrical current. a plexiglas cylinder 100 cm in depth with a 14 cm radius was used as a soil container and filled with uniform moist soil to 90 cm. during the experiments, the bottom 10 cm of soil in the cylinder was kept saturated. a steel bar was used a...

A common issue plaguing battery anodes is the large consumption of lithium in the initial cycle as a result of the formation of a solid electrolyte interphase followed by gradual loss in subsequent cycles. It presents a need for prelithiation to compensate for the loss. However, anode prelithiation faces the challenge of high chemical reactivity because of the low anode potential. Previous effo...

Anode potential has been shown to be a critical factor in the rate of acetate removal in microbial electrolysis cells (MECs), but studies with fermentable substrates and set potentials are lacking. Here, we examined the impact of three different set anode potentials (SAPs; -0.25, 0, and 0.25 V vs. standard hydrogen electrode) on the electrochemical performance, electron flux to various sinks, a...

Microbial electrolysis cell (MEC) is a gripping bio-electrochemical device producing H2 gas from renewable biomass while at the same time treat wastewater.  Through extensive global research efforts in the latest decade, the performance of MECs, including energy efficiency, hydrogen production rate (HPR), and hydrogen recovery have achieved significant breakthroughs. However, employi...