نتایج جستجو برای: austenitizing temperature
تعداد نتایج: 452966 فیلتر نتایج به سال:
aisi 4340 steel is one of the super strong steels that can be selected for different applications. by designing theproper cycles of heat treatment, the optimum microstructure and properties of this steel can be achieved. in thisstudy, different heat treatment cycles were introduced to achieve the optimum microstructure and improve themechanical and magnetic properties of aisi 4340 steel. the re...
in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...
Hot rolling can improve the mechanical properties after heat treatment by improving microstructure. The effect of hot (HR) deformation on microstructural transformation G20CrNi2MoA bearing steel in subsequent CQT (carburizing-quenching and tempering) RQT (reheating-quenching processes was studied. results indicate that austenite grain size decreased 20% 45% reduction, number large-angle boundar...
in this thesis, barium ferrite nano particles were prepared by sol-gel method. their structural and magnetic properties of samples have been investigated using thermo gravimetric analysis (tg-dta), x-ray powder diffractometer (xrd), fourier transform infrared (ftir), scanning electron microscopy (sem), field emission scanning electron microscopy (fesem), ac susceptometer, vibrating sample magne...
The microstructure mechanisms and mechanical properties of 0.23C-1.96Si-1.94Cr-1.93 Mn-0.35 Mo ultra-high strength steel treated by the deep cryogenic treatment at −196 °C were investigated after was hot rolled different temperatures. Experimental results show that austenitizing zone rolling with a large reduction in single pass can comprehensively enhance due to high volume retained austenite ...
In this study, the effect of austempering times on microstructures and mechanical properties dual-matrix structure austempered ductile iron (DMS-ADI) was investigated. With aim, unalloyed as-cast tensile samples were austenitized at 810 °C for 30 min to intercritical austenitizing followed by 350°C various (45 180 min). Experimental results showed that structures consisting proeutectoid ferrite...
Simultaneously increasing the strength and ductility of hot work die steels is significant interest for broad applications. The in-situ development a nano-phase in promising method achieving this objective. However, little success has been reported so far. In study, trace amounts TiC nanoparticles were successfully introduced into high-Cr steel (HHD) through an innovative using nano-TiC/Al mast...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید