A Paper for the World Wise Conference 1999 Winnipeg, Manitoba © November 15, 1999 Introduction Joints are used in concrete pavements in order to control cracking due to thermal and environmental conditions. Dowels span joints to transfer load from one slab to an adjacent slab and to provide vertical and horizontal alignment. Currently, smooth epoxy coated steel dowels are placed across transver...

in this study, the effect of cement content on concrete performance in corrosive environments is investigated on concrete mixtures having the same water/cement (w/c) ratio. three w/c ratios (0.40, 0.45 and 0.50) were used and for each w/c ratio three mixtures were prepared with cement contents 350, 400 and 450 kg/m3. the compressive strength, electrical resistivity and chloride diffusivity of t...

in this study, the effect of cement content on concrete performance in corrosive environments is investigated on concrete mixtures having the same water/cement (w/c) ratio. three w/c ratios (0.40, 0.45 and 0.50) were used and for each w/c ratio three mixtures were prepared with cement contents 350, 400 and 450 kg/m3. the compressive strength, electrical resistivity and chloride diffusivity of t...

This Recommendation covers the description of nondestructive electrochemical test methods for the estimation in large size concrete structures of the instantaneous corrosion current density, icorr, expressed in A/cm, by means of the so-called Polarization Resistance technique, Rp, in order to assess the condition of embedded steel reinforcement related to its corrosion. The values of icorr, can...

One of the most crucial factors affecting the service life of reinforced concrete (RC) structures attacked by aggressive ions is reinforcement corrosion. As the steel corrosion progresses, crack propagation in concrete medium endangers the serviceability and the strength of RC structural members. In this study, a nonlinear mathematical model for determining the displacement and stress fields in...

According to the report of the United Nations, it is said that two-third of world population would be influenced by water shortage before 2050. To use fresh water effectively, the usage of seawater in concrete industry seems imperative. However, the usage of seawater as concrete material is prohibited in almost all the standards or specifications around the world. In this article, the usage of ...

Steel corrosion resulting from the penetration of chloride ions or carbon dioxide is a major cause of degradation for reinforced concrete structures,. The objective of the present investigation was to develop a low-cost sensor for steel corrosion, which is based on a very simple physical principle. The flat end of a cut optical fiber is coated with an iron thin film using the ion sputtering tec...

The aging of reinforced concrete infrastructure in developed countries imposes an urgent need for methods to reliably assess the condition of these structures. Corrosion of the embedded reinforcing steel is the most frequent cause for degradation. While it is well known that the ability of a structure to withstand corrosion depends strongly on factors such as the materials used or the age, it i...

This paper deals with the study of Nanotechnology experimentation in Civil Engineering which includes the development, advantages and limitations of Nano concreting technologies. For reducing carbon emission during cement manufacturing fly ash is used as a replacement in ordinary Portland cement which is termed as Portland pozzolana cement(PPC), this inclusion relatively increases the workabili...

The existing stochastic models for deterioration of reinforced concrete structures is extended by adding modelling of “loss of bond” due to corrosion between the reinforcement bars and the surrounding concrete.