an analytical study was performed to study effects of thermo-diffusion and chemical reactions on a three-dimensional mhd mixed convective flow of dissipative fluid along an infinite vertical porous plate with transverse sinusoidal suction velocity. the parabolic partial differential equations governing the fluid flow, heat transfer, and mass transfer were solved using perturbation technique and...

Cross-corrugated triangular channels increase heat transfer in heat exchangers. The mixing effect increases the heat transfer coefficient at the surfaces. In this study, the fluid flow and heat transfer in a triangular corrugated channel are modeled under two constant heat fluxes and different Reynolds numbers. In order to validate, k-ω turbulence model is used. Also, the effect of magnetic fie...

The unsteady natural convection heat transfer of nanofluid along a vertical plate embedded in porous medium is investigated. The Darcy-Forchheimer model is used to formulate the problem. Thermal conductivity and viscosity models based on a wide range of experimental data of nanofluids and incorporating the velocity-slip effect of the nanoparticle with respect to the base fluid, i.e., Brownian d...

Heat Transfer has special importance in engineering applications. So, researchers have suggested different new idea to increase heat transfer and using nanofluid is one of these methods In recent years, new methods have been used. One of these methods is the use of nanofluids, ., because nanofluids have higher heat transfer potential than base conventional fluids. In this investigation effect o...

nanofluid is a new class of heat transfer fluids engineered by dispersing metallic or non-metallic nanoparticles with a typical size of less than 100 nm in the conventional heat transfer fluids.this article aims to investigate the overall and convection heat transfer coefficient and nusselt number of al2o3-water nanofluid flowing in a horizontal double pipe heat exchanger under turbulent flow (...

The present study experimentally investigated a new hybrid cooling scheme by combination of a microchannel heat sink with a micro-synthetic jet actuator. The heat sink consisted of a single rectangular microchannel measured 550 μm wide, 500 μm deep and 26 mm long. The synthetic jet actuator with a 100 μm diameter orifice was placed right above the microchannel and 5 mm downstream from the chann...

numerical and experimental analyses are performed on multilouvered fin banks in low and medium reynolds regimes to investigate the effects of dimples and perforations on flow structure and heat transfer capacity. in different reynolds numbers the flow efficiency has been calculated numerically and experimentally by flow visualization method and the results showed that dimples and perforations c...

heat transfer phenomena in batch fluidized bed dryer have been studied and analyzed using three phase model including solid phase, interstitial gas phase and bubble phase based on rizzi model. new correlations of heat transfer coefficient to surrounding and convection heat transfer coefficient between solid and interstitial gas are being proposed. in addition, some modifications have been done ...

nucleate pool boiling heat transfer coefficient have been experimentally measured on a horizontal rod heater for various liquid binary mixtures. measurements are based on more than three hundred data points on a wide range of concentrations and heat fluxes. in this investigation, it has been confirmed that the heat transfer coefficient in boiling solutions are regularly less than those in pure ...

Two-phase heat transfer is experimentally examined through vertical small diameter tubes, D =1.45 and 2.8 mm using water under a pressure of 50 to 81 kPa and a natural circulation condition. The pool boiling correlation by Stephan-Abdelsalam and the thermosyphon boiling correlation by Imura, et al. predict the measured experimental data in the 2.8 mm tube with an error of -30%. A large heat tra...