this paper focused on a novel method of electroless plating ruthenium (ru) on solid or porous substrates like porous stainless steel (pss) discs or ceramic tubes. a novel complexing plating bath of ru was developed. it is proven that ru can be deposited directly on these substrates by the bath at a temperature of 328 k and strong alkaline environment. tga, sem, edx and xrd confirmed the success...

Polyacrylonitrile (PAN) membranes with nano-porous surface and high hydrophilicity were fabricated by addition of polyoxyethylene (40) nonylphenyl ether (IGEPAL) as an additive in the casting solution. The membranes were prepared from PAN/IGEPAL/1-Methyl-2-pyrrolidone (NMP) via phase inversion induced by immersion precipitation technique. Pure water was used as coagulation medium. The effects o...

Designs of multilayer antireflection coatings made from co-sputtered and low-refractive-index materials are optimized using a genetic algorithm. Co-sputtered and low-refractive-index materials allow the fine-tuning of refractive index, which is required to achieve optimum anti-reflection characteristics. The algorithm minimizes reflection over a wide range of wavelengths and incident angles, an...

This paper reports the feasibility of synthesis and characterization of One Dimensional nano scale Porous Silicon Photonic Crystals (1D-PSPC) prepared using electrochemical anodization of p-type crystalline silicon wafer by adjusting the current densities. Two structures PSPC1 and PSPC2 with current density 25 and 35mA/cm with 10 minutes of etching time were prepared. Structural and optical pro...

LiFePO4 with an ordered olivine structure has been recognized as a promising cathode material for advanced Li-ion batteries due to its excellent thermal and structural stability, low cost of starting materials, high reversibility of Li ion insertionextraction, and non-toxicity . However, its practical application has suffered from the inherently poor kinetic properties caused by the low electro...

Polyacrylonitrile (PAN) membranes with nano-porous surface and high hydrophilicity were fabricated by addition of polyoxyethylene (40) nonylphenyl ether (IGEPAL) as an additive in the casting solution. The membranes were prepared from PAN/IGEPAL/1-Methyl-2-pyrrolidone (NMP) via phase inversion induced by immersion precipitation technique. Pure water was used as coagulation medium. The effects o...

Over the past decade, many applications were intended for filtration by membrane technology especially the thin film composite (TFC) membranes. In advanced developments of thin film membranes, an attempt was made to spread a new generation of membranes called thin film nano composite (TFN) membranes. However, in the last generation of TFNs, an ultrathin selective film of nanoparticles is coated...

A porous-dense dual-layer composite membrane reactor was proposed. The dual-layer composite membrane composed of dense 0.5 wt % Nb2O5-doped SrCo0.8Fe0.2O3-d (SCFNb) layer and porous Ba0.3Sr0.7Fe0.9Mo0.1O3-d (BSFM) layer was prepared. The stability of SCFNb membrane reactor was improved significantly by the porous-dense dual-layer design philosophy. The porous BSFM surface-coating layer can effe...

Nano-hydroxyapatite/polyamide 66 (nHA/PA66) composite with good bioactivity and osteoconductivity was employed to develop a novel porous membrane with asymmetric structure for guided bone regeneration (GBR). In order to test material cytotoxicity and to investigate surface-dependent responses of bone-forming cells, the morphology, proliferation, and cell cycle of bone marrow stromal cells (BMSC...