The evolution of texture as a function of recrystallization has been characterized for hot-rolled AA1050. Samples prepared from a hot rolled sheet were annealed isothermally for sufficient time to allow complete recrystallization. The spatial orientation variation within the deformed microstructure of nucleation, growth and orientations of recrystallized grains is examined. The microstructural ...

temper rolling or skin pass rolling is one of cold rolling processes composed of a horizontal pass cold rolling mill stand. in this process, the thick strip is subjected to very light reduction (0.5–4%) in thickness in the presence of high friction amplitudes. one of the basic parameters of strip rolling processes is temper rolling force. a new rolling force model has been proposed for temper r...

Plastic deformation of ARMCO iron processed by ECAP up to a maximum equivalent strain of sixteen (i.e., 1, 4, 8, and 16 ECAP passes) following route Bc was investigated by analyzing its microstructure and the stress-strain curves obtained after tensile tests at different levels of deformation. Three values of deformation (two in the plastic region taking into account the modified Crussard-Jaoul...

Mathematical model and dynamic simulation technique of plate heat exchangers (PHEs) with rapid fouling effects were presented. Crank Nicolson’s method and the ghost node technique were used to solve the thermal model. Effects of fouling were added to model through the overall heat transfer coefficient correlation. Rung Kutta 4 was used to receive the integral value of the fouling model. An expe...

In this paper, the wear of work roll in hot plate rolling is introduced and the parameters affecting wear mechanisms in hot strip mill are investigated. In addition, different wear mechanisms in hot rolling and the differences between these mechanisms in different stands are explained. Using the finite element method and the rolling equations, a work roll wear model is proposed. Wear is modeled...

The aim of the present study is the prediction of critical conditions (including critical strain and flow stress) for the initiation of dynamic recrystallization during thermo-mechanical processing of plain carbon steels. For this propose, torsion tests were conducted at different temperature (1050, 1100 and 1150˚C) and strain rates (0.002, 0.02 and 0.2/s). All flow curves showed a peak st...

the full annealing aa6061 aluminum alloy was subjected to severe plastic deformationvia the combination of equal channel angular pressing (ecap) and cold rolling (cr) in order torefine its microstructure and to improve its mechanical properties. according to the results of hotand cold tensile tests, the combination of ecap and cr significantly affected the final strengthand ductility of studied...

In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...