Composite couple beams are the concrete elements consisting of longitudinal bars and steel plate, therefore suitable for shear transferring in couple shear walls with arranged gates in its height. In this paper, after modeling couple beams with and without steel plates with F.E methods and calibration the models with experimental results, effects of parameters such as thickness, height, length ...

In the present investigation, various kinds of surface textures were attained on the steel plates. Roughness of the textures was varied using various grinding or polishing methods. The surface textures were characterized in terms of roughness parameters using an optical profilometer. Then experiments were conducted using an inclined pin-on-plate sliding apparatus to identify the role of surface...

the current study assesses the root causes of hydrogen blisters on low strength carbon steel equipment. for this purpose, some experiments including hardness test, non-destructive test (ndt), metallography, and fractograpghy are conducted. the microstructure of two blisters is assessed by means of optical microscopy and scanning electron microscopy (sem). the microstructural studies show that t...

Orthogonal Eigenstructure Control (OEC) is a novel control method that can be used for active vibration cancellation. OEC is an output feedback control method applicable to multiple-input, multiple-output linear systems. In this paper, application of OEC for active vibration cancellation in a plate is presented. A steel plate clamped at four edges is used as a test plate and piezoelectric actua...

Retained intraocular BBs are difficult to remove. According to manufacturers' specifications, BBs have a spherical diameter of 4.5 mm and a copper plate covering a steel core. They have only moderate magnetic properties because of the copper plate cover and they are too large to be grasped by almost all intraocular forceps and, therefore, present a problem when they are retained in the eye afte...

Passively damped bracing systems in steel frames, in which the conventional materials of the joint are replaced by high damping viscoelastic materials, have the potential of being effective practical means for passive vibration control of dynamically loaded civil engineering structures. However, this potential can be realized only if the associated structural penalties are reduced within accept...

Tests on eighteen small scale models which simulate the elastic and post-buckling behaviour of plate girders when subjected to shear loading are reported and discussed. Themodels were fabricated of steel and Araldite; the major aim was to assess whether small scale models can be employed to study shear buckling problems. A secondary object was to examine whether araldite could be used for predi...

INTRODUCTION Contaminated sponges might lead to cross-contamination in kitchens since they can transfer microorganisms to surfaces where microorganisms can survive for hours or days and contaminate food. The main objective of this study was to evaluate the transfer and the survival of bacteria from kitchen sponges to surfaces of AISI 316 stainless steel and polyethylene. METHODOLOGY Twenty-fo...

We present the results of our numerical simulation of the dynamic response and deformation of 1 m diameter circular DH-36 steel plates and DH-36 steel-polyurea bilayers, subjected to blast-like loads. Different thicknesses of the polyurea are considered and the effect of polyurea thickness on the performance of steel plates under blast loads is investigated. For each polyurea thickness, we have...