the effect of steel plate thickness on the repair effectiveness of rc beam is presented in this paper. a total of four beams were tested, one beam repaired by cfrp with a thickness of 1.2 mm and used as a control beam, and three beams repaired by a steel plate. steel plates with a thickness of 2 mm, 3 mm, and 4 mm were used in repairing the beams. the maximum load-carrying capacity, deflection ...

In order to quantitatively evaluate the shear-bearing capacity of shear connectors of square concrete filled steel tube (CFST), push-out tests on 14 square CFSTs with shear connectors have been carried out. Among the 14 CFSTs, there are 13 specimens with steel plate connectors and one specimen with steel bar connectors. The following factors are investigated to figure out their influences on th...

There are multitudinous, multispecies, nonlinearity, multiphase and so on complex system time and space scales characteristics in steel plate production process, whose defects are divided into dominant defects and hidden defects. Real-time dynamic steel plate defects information can not be effectively and quickly converted, it is difficult to find the relationship among defects facts, defects r...

the steel shear wall and composite steel plate shear wall is introduced in recent three decade and is considered and is spread rapidly. composite steel plate shear wall which is made of a layer of thin steel sheet with coating of reinforced concrete in one or both sides of steel palate is considered a third generation of resistance shear walls against lateral loads that in addition to increasin...

A revised procedure for the design of steel plate shear walls is proposed. In this procedure, the thickness of the infill plate is found using equations that are derived from plastic analysis of the strip model, which is widely accepted for the representation of steel plate shear walls. Equations are derived from a basic steel plate shear wall configuration but are shown to be conservative for ...

A revised procedure for the design of steel plate shear walls is proposed. In this procedure the thickness of the infill plate is found using equations that are derived from the plastic analysis of the strip model, which is an accepted model for the representation of steel plate shear walls. Comparisons of experimentally obtained ultimate strengths of steel plate shear walls and those predicted...

in recent years, more attention is paid to stainless steel 316l as fracture plate and fixation in human's body. present studies are focused on surface and metallurgical properties of this material. biocompatibelity of this material and its superior mechanical properties has made it the most demanded biomaterial. in this research, four different implants are investigated in three stages. four co...

in this paper, nonlinear behavior of composite steel plate shear wall systems, in which steel infill plate is strengthened by fiber reinforced polymer (frp) layers, are experimentally investigated. tests are designed to evaluate the effect of glass-frp layers, layers number of gfrp and orientation of gfrp layers on the stiffness, shear strength, cumulative dissipated energy and other seismic pa...

Steel Plate Shear Wall (SPSW) is made from thin steel plate which in turn are framed by the beams and columns of structural system. In recent year they are proved to be very effective and economical for resisting lateral loads such as earthquake and wind loads.The present work targets to study the behaviour of single frame SPSW with different plate thicknesses, rigid and non-rigid frame members...