We present the results of a plane wave based density functional study of the structure and properties of tetragonal zirconia in the range of pressures from 0 to 50 GPa. We predict a transition to a fluorite-type cubic structure at 37 GPa which is likely to be of a soft mode origin and is accompanied by a power law decrease of the frequency of the Raman-active A(1g) mode. A detailed study of the...

The hydroisomerization of n-butane was carried out in a fixed-bed gas-flow reactor over Pt-promoted Cs2.5H0.5PW12O40 (denoted as Cs2.5). Two kinds of catalysts, a direct impregnation of Pt on Cs2.5 (denoted as Pt/Cs2.5), as well as a mechanical mixture of Pt/Al2O3 and Cs2.5 (denoted as Pt/Al2O3+Cs2.5), were used for the hydroisomerization. Pt/Al2O3+Cs2.5 showed a higher stationary activity than...

The effect of impregnation sequence on the formation of Pt/Ni bimetallic nanoparticles supported on g-Al2O3 was investigated for catalysts with Pt/Ni atomic ratios of 3/1 and 1/1. These bimetallic catalysts were prepared with a fixed Pt loading (5 wt.%) by incipient impregnation of one metal precursor and calcination, followed by the impregnation of the second metal precursor and a second calci...

Currently, aluminum oxide stacked with silicon nitride (Al2O3/SiNx:H) is a promising rear passivation material for high-efficiency P-type passivated emitter and rear cell (PERC). It has been indicated that atomic layer deposition system (ALD) is much more suitable to prepare high-quality Al2O3 films than plasma-enhanced chemical vapor deposition system and other process techniques. In this stud...

The chemical degradation of exfoliated black phosphorus (BP) when exposed to ambient conditions can be effectively suppressed via the deposition of Al2O3 dielectric on the BP surface. A good understanding of the interactions between the BP layer and Al2O3 dielectric is important for practical device applications. In the presented paper, first principles calculations have been performed to study...

The Cu/Al2O3 catalyzed ozonation for degrading an endocrine disruptor—alachlor in water was investigated. The Cu/Al2O3 powders were coated on a cordierite honeycomb column, which was taken as the reactor of catalytic ozonation of alachlor. Additional uncatalyzed experiments were carried out and the results were compared to those of the catalytic runs. The experimental results demonstrated that ...

Organolead trihalide perovskite solar cells based upon the co-deposition of a combined Al2O3-perovskite layer at T < 110 °C are presented. We report an average PCE = 7.2% on a non-sintered Al2O3 scaffold in devices that have been manufactured from a perovskite precursor containing 5 wt% Al2O3 nanoparticles.

Impact of the device size and thickness of Al2O3 film on the Cu pillars and resistive switching memory characteristics of the Al/Cu/Al2O3/TiN structures have been investigated for the first time. The memory device size and thickness of Al2O3 of 18 nm are observed by transmission electron microscope image. The 20-nm-thick Al2O3 films have been used for the Cu pillar formation (i.e., stronger Cu ...