This paper presents a numerical study to investigate the feasibility of transporting mist through the internal cooling channel in high-pressure turbine vanes for film cooling over the vane's surface. The idea of using mist film cooling to enhance conventional air cooling has been proven to be a feasible technique in the laboratory conditions and by computational simulations. However, there is a...

This study measured the pressor and plasma catecholamine response to local hypothermia during adaptation to hypobaric hypoxia. Eight healthy men were studied at rest and after 10 and 45 min of local cooling of one hand and forearm as well as after 30 min of rewarming at sea level and again 24 h and 5 days after rapid, passive transport to high altitude (4,559 m). Acute mountain sickness scores ...

The effect of different austenite grain size and different cooling rates on the austenite to ferrite transformation temperature and different ferrite morphologies in one Nb-microalloyed (HSLA) steel has been investigated. Three different austenite grain sizes were selected and cooled at two different cooling rates for obtaining austenite to ferrite transformation temperature. Moreover, samples ...

I summarize four of the most important areas of uncertainty in the study of the chemistry and cooling of gas with zero or very low metallicity. These are: i) the importance and effects of HD cooling in primordial gas; ii) the importance of metal-line and dust cooling in low metallicity gas; iii) the impact of the large uncertainties that exist in the rate coefficients of several key reactions i...

We observe that high-Q electromagnetic cavity resonances increase the cyclotron cooling rate of pure electron plasmas held in a Penning-Malmberg trap when the electron cyclotron frequency, controlled by tuning the magnetic field, matches the frequency of standing wave modes in the cavity. For certain modes and trapping configurations, this can increase the cooling rate by factors of 10 or more....

Reduced equivalent series resistance (ESR) is necessary, particularly at a high current density, for high performance supercapacitors, and the interface resistance between the current collector and electrode material is one of the main components of ESR. In this report, we have optimized chemical vapor deposition-grown graphene (CVD-G) on a current collector (Ni-foil) using reduced graphene oxi...

In the current work, different methods for optimization of turbine blade internal cooling are investigated, to achieve higher cyclic efficiency and output power for a typical gas turbine. A simple two-dimensional model of C3X blade is simulated and validated with available experimental data. The optimization process is performed on this model with two different methods. The first method is ...

Ni83.25Zr16.75 peritectic alloy was containerlessly solidified in a drop tube. When the droplet diameter exceeds a critical value (Dcrit), Ni7Zr2 phase primarily solidifies, followed by the peritectic reaction of Ni7Zr2 + L → Ni5Zr. Once the droplet diameter is smaller than the critical value (Dcrit), peritectic phase Ni5Zr directly solidifies from the undercooled melt by completely suppressing...

Al0.5CoCrFeNi high-entropy alloy (HEA) was prepared by spark plasma sintering (SPS) using gas atomized powder and treated with different cooling rates (furnace cooling, air water quenching). The phase composition, microstructure, tensile properties, Vickers hardness, compactness, fracture morphology of the were systematically studied. results show that rate can change composition shape HEA from...