in this paper, the nonlinear free vibrations of thin symmetric and non-symmetric cross-ply composite plates subjected to biaxial initial stresses are investigated. because of their excellent properties such as specific strength and specific stiffness, composite plates have wide applications in aerospace and mechanical structures. based on von-karman's strain-displacement relations and using gal...

The excellent properties of Ti have resulted in its generalised use for bone implants. However, Ti is very stiff in comparison with human cortical bone, and this creates problems of bone weakening and loosening of the implant. This article discusses the mechanical properties (flexural and compressive strength, and stiffness) of porous Ti–6Al–4V specimens developed using the space holder method....

Ni–51.4 at.% Ti (Nitinol) containing 24 and 34 vol.% orthogonally interweaving micro-channels with 350–400 lm diameters was fabricated by a powder-metallurgy method. NiTi powder preforms containing steel wire meshes arranged in parallel layers were hot-pressed into NiTi/steel composites, from which the meshes were removed electrochemically, thereby producing micro-channels with tailorable morph...

Dynamic mechanical analysis was used to record the behaviour of hydrated and dehydrated byssal threads under tensile stress and during dynamic thermal cycling. Fresh byssi, and byssi aged two weeks prior to testing, were used to further study the effects of age on the mechanical properties of this material. It was found that while older threads demonstrated increased stiffness, age did not nece...

This study evaluated the feasibility of assessing continuous strain distributions on fracture callus cross-sections with an electronic speckle pattern interferometry (ESPI) system. Mid-sagittal callus cross-sections were harvested from ovine tibiae. One low stiffness (LS) specimen and one high stiffness (HS) specimen were selected to evaluate the feasibility for strain acquisition over a range ...

This paper presents a step towards the design of a novel test for simultaneous identification of all the stiffness components of orthotropic composite materials. A simulator was adopted to numerically simulate the whole identification process. Synthetic images were generated and then processed by Digital Image Correlation (DIC) to calculate the strain fields. The Virtual Fields Method (VFM) was...

In this paper, an analytical formula to calculate the radial stiffness of groove elastic support is presented. The influence of structure parameters on radial stiffness and homogeneity of radial stiffness is investigated as well. The accuracy and calculating speed of the analysis formula are compared to that of finite element method (FEM). Findings are as following: The calculating speed of ana...

SiC reinforced Aluminum samples were produced by stir casting of liquid AA1200 aluminum alloy at 600-650oC casting temperature. 83μm SiC particles were rinsed in 10g/l, 20g/l and 30g/l molar concentration of Sncl2 through cleaning times of 0, 60, 120, and 180 minutes. Some cast samples were tested for mechanical properties and some were subjected to heat treatment before testing. The SnCl2 rins...