An experimental investigation was conducted to study the average and the fully-developed heat (mass) transfer coefficients in a rectangular smooth duct and a duct with repeated-baffle blockages. The focus of attention in this work is the conventional correlation Nu / Nufd 1 + C / ( X / D ) for the average heat transfer coefficient. It was shown that for relatively short ducts, the coefficient C...

the performance of a γ-al 2 o 3 /n-decane nanofluid shell-and-tube heat exchanger in a biomass heating plant is analyzed to specify the optimum condition based on the maximum heat transfer rate and performance index for wide range of nanoparticle volume fraction (0–7%). compared with pure          n-decane, the obtained results in this research show that by using γ-al 2 o 3 /n-decane nanofluid ...

The presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. Moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. The aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coeff...

the vehicle braking system is considered to be one of the most fundamental safety-critical systems in modern vehicles, as its main purpose is to stop or decelerate the vehicle. the frictional heat generated during braking application can cause numerous negative effects on the brake assembly, such as brake fade, premature wear, thermal cracks and disc thickness variation. in the past, surface ro...

Recovery of both latent heat and condensate from boiler flue gas is significant for improving boiler efficiency and water conservation. The condensation experiments are carried out to investigate the simultaneous heat and mass transfer across the nanoporous ceramic membranes (NPCMs) which are treated to be hydrophilic and hydrophobic surfaces using the semicontinuous supercritical reactions. Th...

In this study, by using the finite volume method, the heat transfer in a convective straight fin with temperature-dependent thermal properties and an internal heat generation under multi-boiling heat transfer modes are analyzed. In this regard, the local heat transfer coefficient is considered to vary within a power-law function of temperature. In the present study, the coexistence of all the b...

In the present study, the effective parameters of water-Al2O3 nanofluid flowing in flat tubes are investigated using the EFAST Sensitivity Analysis (SA) method. The SA is performed using GMDH type artificial neural networks (ANN) which are based on validated numerical data of two phase modeling of nanofluid flow in flat tubes. There are five design variables namely: tube flattening (H), flow ra...

Experimental data was generated by performing the experiment on a plate heat exchanger for water/water system, at different flow rate and different hot water inlet temperature, at steady state conditions. Overall heat transfer coefficient (U) is determined for the performance evaluation of plate heat exchanger. The thermal properties of water (thermal Conductivity, Specific heat and density) at...

Helical coil heat exchangers are widely used in industrial applications ranging fromcryogenic processes, air-conditioning, and nuclear reactors to waste heat recovery due totheir compact size and high heat transfer coefficient. In this kind of heat exchangers, flowand heat transfer are complicated. This paper reports a numerical investigation of theinfluence of different parameters such as coil...