The addition of steel fibers into concrete improves the postcracking tensile strength of hardened concrete and hence significantly enhances the shear strength of reinforced concrete reinforced concrete beams. However, developing an accurate model for predicting the shear strength of steel fiber reinforced concrete (SFRC) beams is a challenging task as there are several parameters such as the co...

This paper is based on an experimental research that examined the effects of concrete`s major parameters on durability of concrete pavements and curbs under freezing and thawing cycles. These parameters include concrete mix design parameters such as water-cement ratio, fine aggregate percentage and using air entraining admixture and simulating real freeze-thaw cycles that infrastructures underg...

In the present study, effect of pozzolanic material (Metakaolin and Silica fume) is studied through compressive and Flexural strength in cement concrete. Metakaolin and silica fume area used as cement replacement materials at 5%, 10% and 15% by mass keeping water–cement ratio as 0.42 Compressive and Flexural strength were observed after 7 and 28 days of curing. Silica fume is a by products resu...

according to the iranian code of practice for seismic resistant design of buildings, soft storey phenomenon happens in a storey when the lateral stiffness of the storey is lower than 70% of the stiffness of the upper storey, or if it is lower than 80% of the average stiffness of the three upper stories. in the combined structural systems containing moment frames and shear walls, it is possible ...

Effects of rice husk ash (RHA) on the strength and temperature resistance of concrete were investigated. Different amounts of cement in concrete were replaced by RHA and fly ash (FA), used as mineral admixtures, under the condition of a constant binder content. The compressive strength and temperature resistance were tested at different temperatures. The results show that mixing concrete with t...

in this paper, moment-curvature behavior and ductility of prestressed concrete members based on nonlinear analysis is investigated. influence of various design parameters on ductility of flexural members is determined according to appropriate materials models for stress-strain curves of concrete, prestressing steel and conventional reinforcements. parameters studied include reinforcing index (ω...

This project presents the results of an experimental investigation of graphene oxide on physical properties of concrete. This article aims to find out the optimum quantity of graphene oxide required to achieve maximum compressive, tensile and flexural strength of concrete. Graphene oxide was added to the concrete in three mix proportions. Graphene oxide content were varied by 0.05%, 0.1%, 0.2% ...

The granite stone is the most widely used in the construction and granite slurry is generated through cutting and polishing of the stone. Granite slurry is waste material consisting of very fine powder and creats disposal and environmental problems in worldwide today. Disposal of granite waste leads to health hazards like respiratory and allergy problems to the people around. It also causes the...

Prediction of compressive strength of concrete is very useful for economic constructions. The compressive strength can be estimated after 28 days of casting the specimen cubes or may be predicted based on the quantum and quality of ingredients used in making the concrete. When the first one requires a 28-day time, the second one does have problem of accuracy. Hence, a hybrid model is proposed i...