Energy Dispersive X-Ray Fluorescence (EDXRF) technique has been used to study two Rupee Indian coins minted during the period 1993 to 2010 for their elemental concentrations. From the analysis of the coins, it is found that the coins are made of binary alloy and it was observed that from 2005 onwards, the composition of the coins has been changed from Cupro-Nickel to Ferritic Stainless Steel (F...

introduction: failures might occur at metal‒porcelain interfaces as a problem with metal‒ceramic restorations even with the application of airborne-particle abrasion technique. this study was undertaken to evaluate the effect of nd:yag laser treatment on the bond strength of porcelain fused to metal. methods:  twenty-four cylindrical specimens (4 mm in diameter and 4 mm in height) were made of ...

introduction: file fracture is one of the main procedural mishaps in endodontic treatment. the aim of this in vitro study was to compare the fracture rate of three niti rotary systems; hero 642, mtwo and flexmaster in artificial canals. methods and materials: in this study, bovine long bone was used. after primary preparation of bones, longitudinal sections with 4-cm diameter were cut and encod...

A prototype endovascular electromechanical clot-extraction device was fabricated using a combination of shape memory polymer and shape memory nickel-titanium alloy (nitinol). Five embolic vascular occlusions were created in 4 rabbits by injecting thermally coagulated blood through a 4F catheter in the common carotid artery. Angiography immediately after clot injection showed complete or partial...

Bend it, shape it, remember it Shape-memory alloys have the useful property of returning to their original shape after being greatly deformed. This process depends on the collective behavior of many small mineral grains in the metal. Using threedimensional x-ray diffraction, Sedmák et al. tracked over 15,000 grains in a nickel-titanium shape-memory alloy as it moved through this transformation,...

the purpose of this study was to investigate the effect of heat treatment including solution treatment and aging on the microstructure of cast nickel-based in100 superalloy including size, volume fraction and morphology of primary γ' and different kinds of carbides. for this purpose, different solution heat treatment cycles and a constant aging cycle were implemented on cast ingot samples and t...

In order to understand the beneficial effect of Pt on the adherence of thermally grown alumina scales, sessile drop experiments were performed to study the wetting of poly-crystalline alumina by nickel-aluminum alloys with or without platinum addition where the amount of Pt ranged from 2.4 to 10 at.%. Subsequent interfacial structure was evaluated using atomic force microscopy. Platinum additio...

Parameters identified to reduce and eliminate micro-hole sidewall tapering in nickel alloy C263.