In this study, removal of methylene blue by electro-coagulation method using aluminum and iron electrodes was investigated. The influence of the operating parameters such as contact time, current density, anode type, inter-electrodes distance, initial and final pH and energy consumption rate was determined. Dye removal was increased with increases in solution pH, current density and c...

Fuel cells directly convert chemical energy into electrical power using electrochemical reactions. Solid oxide fuel cell (SOFC) is one of the high-temperature fuel cells that propose a promising future from the standpoint of power generation. In this study, optimization of an SOFC system is performed using Taguchi approach after verification of the model in compare with experimental results. Cu...

the electrocatalytic degradation of methyl orange (mo) on pbo2-tio2 nanocomposite electrodes was studied by cyclic voltammetry and bulk electrolysis. the results reveal that pbo2-tio2 nanocomposite electrodes possess higher oxygen evolution overpotential than pbo2 electrodes and the electrocatalytic degradation of mo on the electrodes is direct oxidation process. the influence of experimental p...

this paper is a preliminary communication of a study on removal and recovery of heavy metalsfrom industrial waste waters using electro-coagulation (ec) technique. the larger study envisages use of solarenergy for producing the d.c. current, and simple chemical methods of standard methods in chemistry like useof hydrochloric acid, hydrogen sulfide, collection of precipitate, incineration and get...

Abstract YAG (Yttrium Aluminum Garnet) was successfully prepared through cathodic electrodeposition process using applying different current densities to the mixture of YCl3 and AlCl3 dissolved in water/ethanol 1:1 solution. Hydroxide precursors were cathodically grown on the cathode surface (at different current densities) and then the obtained hydroxide powder was heat-treated at 1100 °...

output characteristics of fuel cells are affected by a large number of parameters such as geometry, dimensions, construction materials and conditions of supplying fluids. in this paper a mathematical model followed by a two-dimensional numerical approach has been presented to study the fuel cell parametrically. effect of oxygen concentration at gas diffusion layer entrance, temperature and pres...

Zinc was electrodeposited from an acidic sulphate solution on commercial steel sheet substrates galvanostatically at 10, 20, and 100 mA/cm2. The steel substrates had an average roughness number of 1.34 microns and a high percentage of its grains had their (111) planes parallel to the plate surface. During electrodeposition at 10 mA/cm2, on some specimens, there was an intense potential fluctuat...

Zinc was electrodeposited from an acidic sulphate solution on commercial steel sheet substrates galvanostatically at 10, 20, and 100 mA/cm2. The steel substrates had an average roughness number of 1.34 microns and a high percentage of its grains had their (111) planes parallel to the plate surface. During electrodeposition at 10 mA/cm2, on some specimens, there was an intense potential fluctuat...

An analytical model for a coastal boundary current was used to investigate heat and salt budget of exchange flows in the Persian Gulf as a marginal sea. Coastal boundary currents exchange heat and freshwater with the mosphere and the offshore waters. As heat and salinity fluxes caused by air-sea interaction and eddy activities, different temperature and salinity associated with boundary current...