In the present paper, a supersonic wind-tunnel is designed to maintain a flow with Mach number of 3 in a 30cm×30cm test section. An in-house CFD code is developed using the Roe scheme to simulate flow-field and detect location of normal shock in the supersonic wind-tunnel. In the Roe scheme, flow conditions at inner and outer sides of cell faces are determined using an upwind biased algorithm. ...

A trisonic wind tunnel has been modified to improve its flow quality when operating at transonic speeds through perforated walls and side suctions. The usefulness of such a perforated wall, already known, is reduction of the blockage effect as well as the shock elimination. Two types of perforated walls have been used in this investigation. The first wall had a porosity of about 22% and the hol...

The noise source mechanisms involved in motorcycling include various aerodynamic sources and engine noise. The problem of noise source identification requires extensive data acquisition of a type and level that have not previously been applied. Data acquisition on track and on road are problematic due to rider safety constraints and the portability of appropriate instrumentation. One way to add...

To investigate the vehicle induced air pollution situations both inside and outside the tunnel, the field measurement of the pollutants concentrations and its diurnal variations was performed inside and outside the Xiangyin tunnel in Shanghai from 13:00 on April 24th to 13:00 on April 25th, 2013. The highest hourly average concentrations of pollutants were quantified that CO, NO, NO2 and NOX in...

Ducted wind turbines are a kind of small wind turbine having a diffuser or any other shape around the rotor which increases the air flow through the blades and absorbs more power. In the present study, a small wind turbine was ducted with a relatively simple ring and its performance was investigated in a wind tunnel. The duct is shaped using rolling steel sheets on a sloping surface and finally...

This paper describes a working method of assessing the shelter quality of a wind-break, hedge or shelterbelt by a single field measurement, using portable equipment, deployed by an operative with minimal training on any day when the wind is suitable. The automated measurement yields a single characterisation parameter used to access an “expert system” database of information quantifying the ben...

the aim of the present study was to investigate the influence of nozzle configurations on spray drift and explain the influences using several atomization characteristics (length of spray sheet, spray angle, velocity distribution of flow field, fluctuation of velocity, and droplet size). nozzles manufactured by one company (lechler gmbh, germany) were tested by spraying local tap water in a win...

The powering requirement of a land yacht is one of the most important aspects of its design. In this respect the wind tunnel testing is an effective design tool. In fact, changing the parameters of the vehicle and testing the changes in the wind tunnel will give us a better understanding of the most efficient vehicle, and yet it is time consuming, expensive, and has inherent scaling errors. Ano...