نتایج جستجو برای: c master alloy
تعداد نتایج: 1139453 فیلتر نتایج به سال:
در کنترل سیستم ها بروش سیم کشی موازی، جهت ارتباط حسگر و محرک ها، هزینهء تجهیزات و سیم کشی بالا است . در این روش نصب و عیب یابی زمان زیادی می گیرد. بهره گیری از سیستم باس گرچه انتقال اطلاعات بین اجزاء سیستم را افزایش می دهد ولی این توسعهء تبادل اطلاعات فقط در سطوح بالایی هرم اتوماسیون رخ داده است . ارتباطات صنعتی در پایین ترین سطح اتوماسیون گامی دیگر در جهت ارتباط حسگر و محرک (asi) است . سه قسمت...
7 -+ E transformation behavior in a Fe-21Mn alloy with different grain size and a Fe-32Mn-6Si alloy with various degrees of wld rolling is investigated and correlated with damping capacity. Effect of microstructure on damping capacity is discussed on the assumption that the capacity is proportional to volume swept by 7 / e boundaries. 1.INTRODUCTION Fe-Mn based alloys have been well known for s...
In this study, The Al 6061 alloy sheets were produced by Cryorolling process and then were welded by resistance spot welding method. In this regard, the solution treated Al 6061 alloy cryorolled subsequently up to 90% reduction in thickness to produce nanostructure alloy. The cryorolled sheets were then subjected to aging treatment (130˚C-30h) in order to obtain simultaneous strength and ductil...
An Ag-Pd-Cu-Au casting alloy was subjected to solution treatment at various temperatures. The dynamic hardness of each resultant microstructure and the Vickers hardness of the whole alloy were measured to investigate their relationship with changes in metal and crystal structure of the alloy and microstructural elemental concentration. The samples following solution treatment at 650, 700, 750, ...
High-temperature erosion-oxidation behavior of nickel-based alloys containing 0-7 wt.% Mo in fluidized bed waste incineration conditions was studied. A stream of hot condensed air with a flow rate of 25 L/min caused hot silica sand (700 °C) mixed with 0.5 wt.% of chloride salts to hit the specimens for 250 h. By removing the erosive factor, the high-temperature oxidation behavior of the alloys ...
The 17-4PH alloy is a martensitic stainless steel with 3–5 wt% Cu, strengthened by the precipitation hardening. Due to excellent mechanical properties, corrosion resistance and ease of heat treatment, this alloy has unique applications in nuclear power plants and marine constructions. In this paper, the influence of ageing heat treatment, solution annealing followed by ageing at 480, 550 and 62...
BACKGROUND Degraded and osteogenic property of coated magnesium alloy was evaluated for the fracture fixation in rabbits. METHODS Magnesium alloy AZ31 with a different coating thickness by microarc oxidation was used, and the bilateral radial fracture model was created by the bite bone clamp. Thirty-six New Zealand white rabbits in weight of 2.5~3.0 kg were randomly divided into A, B, and C g...
The bioactivity and the corrosion protection for a novel nano-grained Ti-20Nb-13Zr at % alloy were examined in a simulated body fluid (SBF). The effect of the SPS's temperature on the corrosion performance was investigated. The phases and microstructural details of the developed alloy were analyzed by XRD (X-ray Diffraction), SEM (Scanning Electron Microscopy), and TEM (Transmission Electron Mi...
This paper focuses on the fabrication of as-forged Ti46.5Al2Cr1.8Nb-(W, B) alloy via pulse current auxiliary isothermal forging (PCIF). The starting material composed of near gamma (NG) microstructure was fabricated by adopting pre-alloyed powders via hot pressing sintering (HPS) at 1300 °C. Isothermal compression tests were conducted at a strain rate range of 0.001-0.1 s-1 and a temperature ra...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید