ABSTRACT  Introduction: Recently uses of medium and high energy x-rays has been increased in Iran and radiotherapy centers along with a variety of accelerators have been installed in some provinces. In the other hand there is no sufficient skill in designing and making radiotherapy treatment rooms. This study was conducted to evaluate the efficacy of different m...

Reinforced concrete horizontally curved beams are extensively used in many fields, such as in the construction of modern highway intersections, elevated freeways, the rounded corners of buildings, circular balconies,....etc. In some of these cases, large depths are needed for curved beams in order to resist high loads or to fulfill some aesthetic purposes. The analytical analysis of such member...

Steel corrosion leads to the deterioration of bond between concrete and steel bars. The serviceability and ultimate strength of concrete elements within RC structures are hence affected. Many researchers have studied the bond behavior of corroded steel bars. However, very few studies have investigated the effects of confinements on the degradation of bond strength. The present paper proposed a ...

In this work, we demonstrate preliminary results for a hermetically sealed, metal-packaged fibre Bragg grating strain sensor for monitoring existing concrete wind turbine foundations. As the sensor is bolted to the sub-surface of the concrete, it is suitable for mounting onto uneven, wet and degraded surfaces, which may be found in buried foundations. The sensor was able to provide reliable mea...

The construction industry generates a considerable amount of waste. Faced with this undesirable situation, the ready-mix concrete sector, in particular, has invested energy and resources into reusing its own waste in its production process as it works towards the goal of more sustainable construction. This study examines the feasibility of incorporating two types of concrete waste, which curren...

The susceptibility of structural concrete to early-age cracking depends on material composition, methods of processing, structural boundary conditions, and a variety of environmental factors. Computational modeling offers a means for identifying primary factors and strategies for reducing cracking potential. Herein, lattice models are shown to be adept at simulating the thermal-hygral-mechanica...

This paper presents the residual mechanical properties of concrete made with crushed bricks and clay roof tile aggregates after exposure to high temperatures. One referent mixture and eight mixtures with different percentages of replacement of natural aggregate by crushed bricks and roof tiles are experimentally tested. The properties of the concrete were measured before and after exposure to 2...

This research deals with the nonlinear material and geometric behaviors of reinforced concrete deep beams resting on linear or nonlinear Winkler foundation. The finite elements through ANSYS (Release-11, 2007) computer software are used. The reinforced concrete deep beam is modeled using (SOLID 65) 8 node brick element and the soil is modeled using linear spring (COMBIN 14) element or nonlinear...

A precast concrete deck-steel beam-connection (PCSC) connector using ultra-high-performance (UHPC) as post-cast has been proposed to enable rapid on-site construction of assembled composite bridges. This paper aims optimize the structure PCSC connectors finite element (FE) model maximize material utilization and economic efficiency. refined FE comprising bond degradation at steel–UHPC interface...