To investigate the effect of tempering treatment on mechanical properties and the microstructure of DIN 1.4021 Martensitic Stainless Steel, austenite treatment was conducted for the samples at 1000 ºC temperature for 60 min and then the samples were oil quenched. Later, tempering treatments were performed for the samples at 500 ºC and 700 ºC temperatures for 2 and 5 h, respectively; then quench...

Effects of tempering temperature on tensile and hole expansion properties in a dual-phase C–Mn steel were investigated. The ultimate tensile strength and yield strength decreased and elongations increased with an increase of tempering temperature. The hole expansion property increased significantly at the tempering temperature ranging from 200 to 300 8C and did not show significant difference w...

to investigate the effect of tempering treatment on mechanical properties and the microstructure ofdin 1.4021 martensitic stainless steel, austenite treatment was conducted for the samples at 1000ºc temperature for 60 min and then the samples were oil quenched. later, tempering treatments wereperformed for the samples at 500 ºc and 700 ºc temperatures for 2 and 5 h, respectively; then quenching...

the aim of the paper presented here is to develop the ti - micralloyed steel in otrer to oprtmize the mechanical properties after direct quenching from hot forging temperature. for this purpose, seven melts containing various amounts of titanium were prepared and cast in metal and sand molds. from the ingots, cast in metal mould, tractor links were produced by hot forging. the produced links we...

In order to quantify the effect of temperature on the mechanical properties of pure nylon 6 and its composite with cellulose fibers (containing 25 wt% cellulose fibers), the materials were sampled and tested at three representative temperatures of 256, 296, and 336 K. Flexural and tensile tests were performed and the reductions in mechanical properties were evaluated. The highest reductions wer...