in the present work, high temperature tensile properties of medium density polyethylene (mdpe) and its nanocomposites are investigated. for this purpose mdpe reinforced with different weight percentages of nano-sized calcium (2, 5, 10) are produced by compression moulding method. tensile tests have been carried out at different temperatures, i.e. 30, 60, 90c using thermomechanical analysis (tm...

A polymer intercalated/exfoliated (PIE) cement is synthesized and its high-temperature tensile performance is characterized. Due to the reinforcing effect of the nanointerphase, the flexure strength of the PIE cement is higher than that of ordinary cements by more than an order of magnitude in a broad temperature range. The temperature at which the optimum mechanical properties are obtained is ...

dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500c. stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500c, and smooth flow at the other temperatures. both yield and ultimate tensile strengths increased with increasing testing temperature up to about 4500c and then decreased at h...

in the present study, the influence of annealing temperature on mechanical properties and the microstructure of a high manganese austenitic steel (fe-30mn-4al-4si-0.5c) was investigated. x-ray diffractometry, optical and scanning electron microscopy, hardness and tensile tests were used to analyze the relationship between mechanical properties and microstructure after annealing process. the res...

Pressurized water reactor (PWR) cores operate under extreme environmental conditions due to coolant chemistry, operating temperature, and neutron exposure. Extending the life of PWRs requires detailed knowledge of the changes in mechanical and corrosion properties of the structural austenitic stainless steel components adjacent to the fuel (internals) that are inherent to such conditions. This ...

Nowadays, Ni-free austenitic stainless steels are being developed rapidly and high price of nickel is one of the most important motivations for this development. At present research a new FeCrMn steel was designed and produced based on Fe-Cr-Mn-C system. Comparative studies on microstructure and high temperature mechanical properties of  new steel and AISI 316 steel were done. The results ...

in this research, the effect of 2.3 wt.% aluminum addition on the microstructure and tensile properties of high manganese austenitic steel fe-18mn-0.6c was studied. for this purpose, the samples were investment cast, homogenized and hot rolled. tensile testing was carried out at ambient temperature. microstructural investigations and fractography on the steel samples were carried out using an o...