In this paper, the transient response of a viscoelastic annular plate which has time-dependent properties is determined mathematically under dynamic transverse load. The axisymmetric conditions are considered in the problem. The viscoelastic properties obey the standard linear solid model in shear and the bulk behavior in elastic. The equations of motion are extracted using Hamilton’s principle...

There are different finite element models in place for predicting the bending behavior of shear deformable beams and plates. Mostly, the literature abounds with traditional equi-spaced Langrange based low order finite element approximations using displacement formulations. However, the finite element models of Timoshenko beams and Mindlin plates with linear interpolation of all generalized disp...

An earthquake with the magnitude of 5.9 Mw occurred in Qeshm Island and Hormozgan province in November 27th 2005. 3D co-seismic deformation field caused by the earthquake are determined based on the ascending and descending interferograms and azimuth offsets. The peak to peak estimated displacement is about 10 cm in west, 69 cm in north and 22 cm in vertical directions. We apply strain analysis...

Deformation modulus of rock mass has a significant role in the support design of an underground excavation. It is determined by expensive in-situ tests or by empirical models. Existing models for estimation of deformation modulus do not consider its stress dependence. Herein, data from several sources is used to develop a stress- (depth-) dependent relation for estimation of deformation modulus...

an important concern in rock mechanics is non-homogeneity as joints or fault. adopting the joints as fractures, fractures are well known for their effects on the mechanical and transport properties of rock. it has been postulated that through fractured/jointed rock, mainly, the polygons turned to the shear vector (ti) are involved in the mobilization of shear resistance. consequently, in order ...

The present study introduces a generalized 2-unknown’s higher order shear deformation theory (HSDT) for isotropic and orthotropic plates. The well-known Shimpi’s two-unknown's HSDT is reproduced as a special case. Reddy’s shear strain shape function (SSSF) is also adapted to the present generalized theory. The results show that both Shimpi and the adapted Reddy’ HSDT are essentially the same, i...