In the current scenario, natural fiber reinforced polymer nanocomposites are widely used in the areas of aerospace, automobile, sports and military sectors due to its multi-functional features like high specific strength, high corrosion resistance, flame resistance, improved mechanical properties and low cost when compared with artificial fiber reinforced composites. These polymer based nanocom...

The ultimate tensile behaviour of fibre-reinforced cementitious composites is closely related to its failure mechanisms which in turn are dependent on reinforcement parameters such as fibre characteristics and the fibre/matrix interface properties. Based on the direct tensile tests of mortar specimens reinforced with various synthetic fibres, this paper attempts to explain such relationships an...

Articles you may be interested in Anisotropic thermal conductivity in single crystal β-gallium oxide Appl. Thermal conductivity and interfacial conductance of AlN particle reinforced metal matrix composites

Milling of fiber reinforced polymer composites is of great importance for integrated composites with other mating parts. Improper selection of cutting process parameters, excessive cutting forces and other machining conditions would result in rejection of components. Therefore, machining conditions are optimized to reduce the machining forces and damages. This work reports practical experiments...

Volume fraction of fibres (A), aspect ratio of fibres (B) and fibres orientation (C) are considered as control factors in the determination of hardness strength, hardness strength of plantain fiber reinforced polyester composites (PFR P). These properties were determined for plantain empty fruit bunch (PEFB) and plantain pseudo stem (PPS). Hardness tests were conducted on the replicated samples...

The creep and dynamic mechanical behavior of natural fiber/epoxy composites using functionalized multiwalled carbon nanotubes (MWCNTs) modified matrix were investigated. 0.4 wt% of MWCNTs functionalized with carboxylic acid groups (MWCNTs-COOH) were dispersed in epoxy and three-phase multiscale hybrid composites were processed by hot press. Natural fiber/epoxy two-phase composites without MWCNT...

Reactive infiltration processing was used to fabricate bulk NiAl and fiber-reinforced NiAl composites. Homogenous, pore-free materials were obtained by chemical reaction between nickel and aluminum after complete infiltration with liquid aluminum of preforms of nickel wires (containing tungsten wires for the composites) with low surface-to-volume ratio, high permeability, and regular infiltrati...

Pure HA and 1, 3, 5, and 10 vol% multiwalled carbon nanotube- (MWNT-) reinforced hydroxyapatite (HA) were consolidated using a spark plasma sintering (SPS) technique. The relative density of pure HA increased with increasing sintering temperature, but that of the MWNT/HA composite reached almost full density at 900°C, and then decreased with further increases in sintering temperature. The relat...

The composites provide design flexibility because many of them can be moulded into complex shapes. The carbon fibre-reinforced epoxy composites exhibit excellent fatigue tolerance and high specific strength and stiffness which have led to numerous advanced applications ranging from the military and civil aircraft structures to the consumer products. However, the modelling of the beams undergoin...

Concrete columns confined with high-strength fiber reinforced polymer (FRP) composites can enhance the strength as well as the ductility of such structures. In recent years, the use of FRP composites to repair and strengthen existing reinforced concrete (RC) structures has been widely used. When the columns of existing RC structures are wrapped with FRP composites, the core concrete of such col...